http://www.int-bizdirectory.com/

http://www.int-bizdirectory.com/Standards.htm

http://www.int-bizdirectory.com/Standards/ASTM/ASTM%20C.htm

C4-04e1 Standard Specification for Clay Drain Tile and Perforated Clay Drain Tile
C5-03 Standard Specification for Quicklime for Structural Purposes
C10-07 Standard Specification for Natural Cement
C11-08c Standard Terminology Relating to Gypsum and Related Building Materials and Systems
C12-08 Standard Practice for Installing Vitrified Clay Pipe Lines
C14-07 Standard Specification for Nonreinforced Concrete Sewer, Storm Drain, and Culvert Pipe
C14M-07 Standard Specification for Nonreinforced Concrete Sewer, Storm Drain, and Culvert Pipe [Metric]
C16-03(2008) Standard Test Method for Load Testing Refractory Shapes at High Temperatures
C20-00(2005) Standard Test Methods for Apparent Porosity, Water Absorption, Apparent Specific Gravity, and Bulk Density of Burned Refractory Brick and Shapes by Boiling Water
C22/C22M-00(2005)e1 Standard Specification for Gypsum
C24-01(2006) Standard Test Method for Pyrometric Cone Equivalent (PCE) of Fireclay and High Alumina Refractory Materials
C25-06 Standard Test Methods for Chemical Analysis of Limestone, Quicklime, and Hydrated Lime
C27-98(2008) Standard Classification of Fireclay and High-Alumina Refractory Brick
C28/C28M-00(2005) Standard Specification for Gypsum Plasters
C29/C29M-07 Standard Test Method for Bulk Density ("Unit Weight") and Voids in Aggregate
C31/C31M-08b Standard Practice for Making and Curing Concrete Test Specimens in the Field
C31/C31M-08a Práctica Normalizada para Preparación y Curado de Especímenes de Ensayo de Concreto en la Obra
C32-05 Standard Specification for Sewer and Manhole Brick (Made From Clay or Shale)
C33/C33M-08 Standard Specification for Concrete Aggregates
C33-07 Especificación Normalizada de Agregados para Concreto
C34-03 Standard Specification for Structural Clay Load-Bearing Wall Tile
C35-01(2005) Standard Specification for Inorganic Aggregates for Use in Gypsum Plaster
C39/C39M-05e2 Standard Test Method for Compressive Strength of Cylindrical Concrete Specimens
C39/C39M-05e2 |Método de Ensayo Normalizado para Resistencia a la Compresión de Especímenes Cilíndricos de Concreto
C40-04 Standard Test Method for Organic Impurities in Fine Aggregates for Concrete
C42/C42M-04 Standard Test Method for Obtaining and Testing Drilled Cores and Sawed Beams of Concrete
C42/C42M-04 Método de Ensayo Normalizado para la Obtención y Ensayo de Núcleos Perforados y Vigas Aserradas de Concreto
C50-00(2006) Standard Practice for Sampling, Sample Preparation, Packaging, and Marking of Lime and Limestone Products
C51-07 Standard Terminology Relating to Lime and Limestone (as used by the Industry)
C55-06e1 Standard Specification for Concrete Building Brick
C56-05 Standard Specification for Structural Clay Nonloadbearing Tile
C59/C59M-00(2006) Standard Specification for Gypsum Casting Plaster and Gypsum Molding Plaster
C61/C61M-00(2006) Standard Specification for Gypsum Keene's Cement
C62-08 Standard Specification for Building Brick (Solid Masonry Units Made From Clay or Shale)
C67-08 Standard Test Methods for Sampling and Testing Brick and Structural Clay Tile
C70-06 Standard Test Method for Surface Moisture in Fine Aggregate
C71-08 Standard Terminology Relating to Refractories
C73-05 Standard Specification for Calcium Silicate Brick (Sand-Lime Brick)
C76-08a Standard Specification for Reinforced Concrete Culvert, Storm Drain, and Sewer Pipe
C76M-08a Standard Specification for Reinforced Concrete Culvert, Storm Drain, and Sewer Pipe (Metric)
C78-08 Standard Test Method for Flexural Strength of Concrete (Using Simple Beam with Third-Point Loading)
C87-05 Standard Test Method for Effect of Organic Impurities in Fine Aggregate on Strength of Mortar
C88-05 Standard Test Method for Soundness of Aggregates by Use of Sodium Sulfate or Magnesium Sulfate
C90-08 Standard Specification for Loadbearing Concrete Masonry Units
C91-05 Standard Specification for Masonry Cement
C92-95(2005) Standard Test Methods for Sieve Analysis and Water Content of Refractory Materials
C94/C94M-09 Standard Specification for Ready-Mixed Concrete
C94M-07 Especificación Normalizada para Concreto Premezclado
C97-02(2008) Standard Test Methods for Absorption and Bulk Specific Gravity of Dimension Stone
C99-08 Standard Test Method for Modulus of Rupture of Dimension Stone
C108-46(2004) Standard Symbols for Heat Transmission
C109/C109M-08 Standard Test Method for Compressive Strength of Hydraulic Cement Mortars (Using 2-in. or [50-mm] Cube Specimens)
C109/C109M-07 Método Normalizado de Ensayo de Resistencia a Compresión de Morteros de Cemento Hidráulico (Utilizando Especímenes Cúbicos de 2 in. o [50-mm])
C110-08a Standard Test Methods for Physical Testing of Quicklime, Hydrated Lime, and Limestone
C113-02(2008) Standard Test Method for Reheat Change of Refractory Brick
C114-09 Standard Test Methods for Chemical Analysis of Hydraulic Cement
C115-96a(2003) Standard Test Method for Fineness of Portland Cement by the Turbidimeter
C117-04 Standard Test Method for Materials Finer than 75-μm (No. 200) Sieve in Mineral Aggregates by Washing
C118-05a Standard Specification for Concrete Pipe for Irrigation or Drainage
C118M-05a Standard Specification for Concrete Pipe for Irrigation or Drainage [Metric]
C119-08 Standard Terminology Relating to Dimension Stone
C120-06e1 Standard Test Methods of Flexure Testing of Slate (Breaking Load, Modulus of Rupture, Modulus of Elasticity)
C121-06 Standard Test Method for Water Absorption of Slate
C123-04 Standard Test Method for Lightweight Particles in Aggregate
C125-07 Standard Terminology Relating to Concrete and Concrete Aggregates
C126-99(2005) Standard Specification for Ceramic Glazed Structural Clay Facing Tile, Facing Brick, and Solid Masonry Units
C127-07 Standard Test Method for Density, Relative Density (Specific Gravity), and Absorption of Coarse Aggregate
C128-07a Standard Test Method for Density, Relative Density (Specific Gravity), and Absorption of Fine Aggregate
C129-06 Standard Specification for Nonloadbearing Concrete Masonry Units
C131-06 Standard Test Method for Resistance to Degradation of Small-Size Coarse Aggregate by Abrasion and Impact in the Los Angeles Machine
C133-97(2008) Standard Test Methods for Cold Crushing Strength and Modulus of Rupture of Refractories
C134-95(2005) Standard Test Methods for Size, Dimensional Measurements, and Bulk Density of Refractory Brick and Insulating Firebrick
C135-96(2003) Standard Test Method for True Specific Gravity of Refractory Materials by Water Immersion
C136-06 Standard Test Method for Sieve Analysis of Fine and Coarse Aggregates
C138/C138M-08 Standard Test Method for Density (Unit Weight), Yield, and Air Content (Gravimetric) of Concrete
C139-05 Standard Specification for Concrete Masonry Units for Construction of Catch Basins and Manholes
C140-08a Standard Test Methods for Sampling and Testing Concrete Masonry Units and Related Units
C141-97(2005) Standard Specification for Hydraulic Hydrated Lime for Structural Purposes
C142-97(2004) Standard Test Method for Clay Lumps and Friable Particles in Aggregates
C143/C143M-08 Standard Test Method for Slump of Hydraulic-Cement Concrete
C144-04 Standard Specification for Aggregate for Masonry Mortar
C144-04 Especificación Normalizada para Agregados para Morteros de Alba?ilería
C146-94a(2004) Standard Test Methods for Chemical Analysis of Glass Sand
C147-86(2005) Standard Test Methods for Internal Pressure Strength of Glass Containers
C148-00(2006) Standard Test Methods for Polariscopic Examination of Glass Containers
C149-86(2005) Standard Test Method for Thermal Shock Resistance of Glass Containers
C150-07 Standard Specification for Portland Cement
C150-07 Especificación Normalizada para Cemento Portland
C151/C151M-09 Standard Test Method for Autoclave Expansion of Hydraulic Cement
C155-97(2007) Standard Classification of Insulating Firebrick
C156-05 Standard Test Method for Water Retention by Liquid Membrane-Forming Curing Compounds for Concrete
C157/C157M-08 Standard Test Method for Length Change of Hardened Hydraulic-Cement Mortar and Concrete
C158-02(2007) Standard Test Methods for Strength of Glass by Flexure (Determination of Modulus of Rupture)
C159-06 Standard Specification for Vitrified Clay Filter Blocks
C162-05 Standard Terminology of Glass and Glass Products
C163-05 Standard Practice for Mixing Thermal Insulating Cement Samples
C165-07 Standard Test Method for Measuring Compressive Properties of Thermal Insulations
C166-05 Standard Test Method for Covering Capacity and Volume Change Upon Drying of Thermal Insulating Cement
C167-98(2003) Standard Test Methods for Thickness and Density of Blanket or Batt Thermal Insulations
C168-08b Standard Terminology Relating to Thermal Insulation
C169-92(2005) Standard Test Methods for Chemical Analysis of Soda-Lime and Borosilicate Glass
C170-06 Standard Test Method for Compressive Strength of Dimension Stone
C171-07 Standard Specification for Sheet Materials for Curing Concrete
C172-08 Standard Practice for Sampling Freshly Mixed Concrete
C172-08 Práctica Normalizada para Muestreo de Concreto Recién Mezclado
C173/C173M-08a Standard Test Method for Air Content of Freshly Mixed Concrete by the Volumetric Method
C174/C174M-06 Standard Test Method for Measuring Thickness of Concrete Elements Using Drilled Concrete Cores
C177-04 Standard Test Method for Steady-State Heat Flux Measurements and Thermal Transmission Properties by Means of the Guarded-Hot-Plate Apparatus
C179-04 Standard Test Method for Drying and Firing Linear Change of Refractory Plastic and Ramming Mix Specimens
C181-03 Standard Test Method for Workability Index of Fireclay and High-Alumina Plastic Refractories
C182-88(2004) Standard Test Method for Thermal Conductivity of Insulating Firebrick
C183-08 Standard Practice for Sampling and the Amount of Testing of Hydraulic Cement
C185-08 Standard Test Method for Air Content of Hydraulic Cement Mortar
C186-05 Standard Test Method for Heat of Hydration of Hydraulic Cement
C187-04 Standard Test Method for Normal Consistency of Hydraulic Cement
C188-95(2003) Standard Test Method for Density of Hydraulic Cement
C191-08 Standard Test Methods for Time of Setting of Hydraulic Cement by Vicat Needle
C192/C192M-07 Standard Practice for Making and Curing Concrete Test Specimens in the Laboratory
C192/C192M-07 Práctica Normalizada para Preparación y Curado de Especímenes de Concreto para Ensayo en Laboratorio
C195-07 Standard Specification for Mineral Fiber Thermal Insulating Cement
C196-00(2005) Standard Specification for Expanded or Exfoliated Vermiculite Thermal Insulating Cement
C198-02(2008) Standard Test Method for Cold Bonding Strength of Refractory Mortar
C199-84(2005) Standard Test Method for Pier Test for Refractory Mortars
C201-93(2004) Standard Test Method for Thermal Conductivity of Refractories
C202-93(2004) Standard Test Method for Thermal Conductivity of Refractory Brick
C203-05a Standard Test Methods for Breaking Load and Flexural Properties of Block-Type Thermal Insulation
C204-07 Standard Test Methods for Fineness of Hydraulic Cement by Air-Permeability Apparatus
C206-03 Standard Specification for Finishing Hydrated Lime
C207-06 Standard Specification for Hydrated Lime for Masonry Purposes
C208-08a Standard Specification for Cellulosic Fiber Insulating Board
C209-07ae1 Standard Test Methods for Cellulosic Fiber Insulating Board
C210-95(2007)e1 Standard Test Method for Reheat Change of Insulating Firebrick
C212-00(2006) Standard Specification for Structural Clay Facing Tile
C215-08 Standard Test Method for Fundamental Transverse, Longitudinal, and Torsional Frequencies of Concrete Specimens
C216-07a Standard Specification for Facing Brick (Solid Masonry Units Made from Clay or Shale)
C217-94(2004) Standard Test Method for Weather Resistance of Slate
C219-07a Standard Terminology Relating to Hydraulic Cement
C220-91(2004)e1 Standard Specification for Flat Asbestos-Cement Sheets
C221-98(2008) Standard Specification for Corrugated Asbestos-Cement Sheets
C222-97(2008) Standard Specification for Asbestos-Cement Roofing Shingles
C223-98(2008) Standard Specification for Asbestos-Cement Siding
C224-78(2004)e1 Standard Practice for Sampling Glass Containers
C225-85(2004) Standard Test Methods for Resistance of Glass Containers to Chemical Attack
C226-07 Standard Specification for Air-Entraining Additions for Use in the Manufacture of Air-Entraining Hydraulic Cement
C227-03 Standard Test Method for Potential Alkali Reactivity of Cement-Aggregate Combinations (Mortar-Bar Method)
C230/C230M-08 Standard Specification for Flow Table for Use in Tests of Hydraulic Cement
C231-08c Standard Test Method for Air Content of Freshly Mixed Concrete by the Pressure Method
C232-07 Standard Test Methods for Bleeding of Concrete
C233-07 Standard Test Method for Air-Entraining Admixtures for Concrete
C240-08 Standard Test Methods of Testing Cellular Glass Insulation Block
C241-90(2005) Standard Test Method for Abrasion Resistance of Stone Subjected to Foot Traffic
C242-01(2007) Standard Terminology of Ceramic Whitewares and Related Products
C260-06 Standard Specification for Air-Entraining Admixtures for Concrete
C260-06 Especificación Normalizada de Aditivos Incorporadores de Aire para Concreto
C265-08 Standard Test Method for Water-Extractable Sulfate in Hydrated Hydraulic Cement Mortar
C266-08 Standard Test Method for Time of Setting of Hydraulic-Cement Paste by Gillmore Needles
C267-01(2006) Standard Test Methods for Chemical Resistance of Mortars, Grouts, and Monolithic Surfacings and Polymer Concretes
C270-08a Standard Specification for Mortar for Unit Masonry
C271/C271M-05 Standard Test Method for Density of Sandwich Core Materials
C272-01(2007) Standard Test Method for Water Absorption of Core Materials for Structural Sandwich Constructions
C273/C273M-07a Standard Test Method for Shear Properties of Sandwich Core Materials
C274-07 Standard Terminology of Structural Sandwich Constructions
C279-88(2007) Standard Specification for Chemical-Resistant Masonry Units
C282-99(2005) Standard Test Method for Acid Resistance of Porcelain Enamels (Citric Acid Spot Test)
C283-97(2008) Standard Test Methods for Resistance of Porcelain Enameled Utensils to Boiling
Acid
C285-88(2005) Standard Test Methods for Sieve Analysis of Wet-Milled and Dry-Milled Porcelain Enamel
C286-99(2004) Standard Terminology Relating to Porcelain Enamel and Ceramic-Metal Systems
C287-98(2008)e1 Standard Specification for Chemical-Resistant Sulfur Mortar
C288-87(2002) Standard Test Method for Disintegration of Refractories in an Atmosphere of Carbon Monoxide
C289-07 Standard Test Method for Potential Alkali-Silica Reactivity of Aggregates (Chemical Method)
C293-08 Standard Test Method for Flexural Strength of Concrete (Using Simple Beam With Center-Point Loading)
C294-05 Standard Descriptive Nomenclature for Constituents of Concrete Aggregates
C295-08 Standard Guide for Petrographic Examination of Aggregates for Concrete
C296-00(2004)e1 Standard Specification for Asbestos-Cement Pressure Pipe
C297/C297M-04 Standard Test Method for Flatwise Tensile Strength of Sandwich Constructions
C301-04 Standard Test Methods for Vitrified Clay Pipe
C302-95(2007) Standard Test Method for Density and Dimensions of Preformed Pipe-Covering-Type Thermal Insulation
C303-07 Standard Test Method for Dimensions and Density of Preformed Block and Board-Type Thermal Insulation
C305-06 Standard Practice for Mechanical Mixing of Hydraulic Cement Pastes and Mortars of Plastic Consistency
C307-03(2008) Standard Test Method for Tensile Strength of Chemical-Resistant Mortar, Grouts, and Monolithic Surfacings
C308-00(2005) Standard Test Methods for Working, Initial Setting, and Service Strength Setting Times of Chemical-Resistant Resin Mortars
C309-07 Standard Specification for Liquid Membrane-Forming Compounds for Curing Concrete
C311-07 Standard Test Methods for Sampling and Testing Fly Ash or Natural Pozzolans for Use in Portland-Cement Concrete
C315-07 Standard Specification for Clay Flue Liners and Chimney Pots
C317/C317M-00(2005) Standard Specification for Gypsum Concrete
C318/C318M-00(2005) Standard Specification for Gypsum Formboard
C321-00(2005) Standard Test Method for Bond Strength of Chemical-Resistant Mortars
C322-09 Standard Practice for Sampling Ceramic Whiteware Clays
C323-56(2006) Standard Test Methods for Chemical Analysis of Ceramic Whiteware Clays
C324-01(2007) Standard Test Method for Free Moisture in Ceramic Whiteware Clays
C325-07 Standard Guide for Wet Sieve Analysis of Ceramic Whiteware Clays
C326-09 Standard Test Method for Drying and Firing Shrinkages of Ceramic Whiteware Clays
C329-88(2006) Standard Test Method for Specific Gravity of Fired Ceramic Whiteware Materials
C330-05 Standard Specification for Lightweight Aggregates for Structural Concrete
C330-05 Especificación Normalizada para Agregados Livianos para Concreto Estructural
C331-05 Standard Specification for Lightweight Aggregates for Concrete Masonry Units
C332-07 Standard Specification for Lightweight Aggregates for Insulating Concrete
C335-05ae1 Standard Test Method for Steady-State Heat Transfer Properties of Pipe Insulation
C336-71(2005) Standard Test Method for Annealing Point and Strain Point of Glass by Fiber Elongation
C338-93(2008) Standard Test Method for Softening Point of Glass
C341/C341M-06 Standard Practice for Length Change of Cast, Drilled, or Sawed Specimens of Hydraulic-Cement Mortar and Concrete
C346-87(2004)e1 Standard Test Method for 45-deg Specular Gloss of Ceramic Materials
C348-08 Standard Test Method for Flexural Strength of Hydraulic-Cement Mortars
C349-08 Standard Test Method for Compressive Strength of Hydraulic-Cement Mortars (Using Portions of Prisms Broken in Flexure)
C356-03 Standard Test Method for Linear Shrinkage of Preformed High-Temperature Thermal Insulation Subjected to Soaking Heat
C357-07 Standard Test Method for Bulk Density of Granular Refractory Materials
C359-08 Standard Test Method for Early Stiffening of Hydraulic Cement (Mortar Method)
C361-08 Standard Specification for Reinforced Concrete Low-Head Pressure Pipe
C361M-08 Standard Specification for Reinforced Concrete Low-Head Pressure Pipe [Metric]
C363-00 Standard Test Method for Delamination Strength of Honeycomb Core Materials
C364/C364M-07 Standard Test Method for Edgewise Compressive Strength of Sandwich Constructions
C365/C365M-05 Standard Test Method for Flatwise Compressive Properties of Sandwich Cores
C366/C366M-05 Standard Test Methods for Measurement of Thickness of Sandwich Cores
C367-05 Standard Test Methods for Strength Properties of Prefabricated Architectural Acoustical Tile or Lay-In Ceiling Panels
C368-88(2006) Standard Test Method for Impact Resistance of Ceramic Tableware
C370-88(2006) Standard Test Method for Moisture Expansion of Fired Whiteware Products
C371-09 Standard Test Method for Wire-Cloth Sieve Analysis of Nonplastic Ceramic Powders
C372-94(2007) Standard Test Method for Linear Thermal Expansion of Porcelain Enamel and Glaze Frits and Fired Ceramic Whiteware Products by the Dilatometer Method
C373-88(2006) Standard Test Method for Water Absorption, Bulk Density, Apparent Porosity, and Apparent Specific Gravity of Fired Whiteware Products
C374-70(2004)e1 Standard Test Methods for Fusion Flow of Porcelain Enamel Frits (Flow-Button Methods)
C375-58(2006) Standard Classification of Water Used in Milling of Porcelain Enamel
C384-04 Standard Test Method for Impedance and Absorption of Acoustical Materials by Impedance Tube Method
C385-58(2004)e1 Standard Test Method for Thermal Shock Resistance of Porcelain-Enameled Utensils
C386-93(2008) Standard Practice for Use of Chemical-Resistant Sulfur Mortar
C387/C387M-09 Standard Specification for Packaged, Dry, Combined Materials for Mortar and Concrete
C390-08e1 Standard Practice for Sampling and Acceptance of Thermal Insulation Lots
C393/C393M-06 Standard Test Method for Core Shear Properties of Sandwich Constructions by Beam Flexure
C394-00(2008) Standard Test Method for Shear Fatigue of Sandwich Core Materials
C395-01(2006) Standard Specification for Chemical-Resistant Resin Mortars
C397-00(2005) Standard Practice for Use of Chemically Setting Chemical-Resistant Silicate and Silica Mortars
C398-98(2008) Standard Practice for Use of Hydraulic Cement Mortars in Chemical-Resistant Masonry
C399-98(2008)e1 Standard Practice for Use of Chemical-Resistant Resin Mortars
C400-98(2006) Standard Test Methods for Quicklime and Hydrated Lime for Neutralization of Waste Acid
C401-91(2005) Standard Classification of Alumina and Alumina-Silicate Castable Refractories
C403/C403M-08 Standard Test Method for Time of Setting of Concrete Mixtures by Penetration Resistance
C404-07 Standard Specification for Aggregates for Masonry Grout
C406-06e1 Standard Specification for Roofing Slate
C408-88(2006) Standard Test Method for Thermal Conductivity of Whiteware Ceramics
C410-08 Standard Specification for Industrial Floor Brick
C411-05 Standard Test Method for Hot-Surface Performance of High-Temperature Thermal Insulation
C412-05a Standard Specification for Concrete Drain Tile
C412M-05a Standard Specification for Concrete Drain Tile [Metric]
C413-01(2006) Standard Test Method for Absorption of Chemical-Resistant Mortars, Grouts, Monolithic Surfacings, and Polymer Concretes
C414-03(2008) Standard Test Method for Working, Setting, and Service Strength Setting Times of Chemically Setting Chemical-Resistant Silicate and Silica Mortars
C416-97(2007) Standard Classification of Silica Refractory Brick
C417-05 Standard Test Method for Thermal Conductivity of Unfired Monolithic Refractories
C418-05 Standard Test Method for Abrasion Resistance of Concrete by Sandblasting
C419-08 Standard Practice for Making and Curing Test Specimens of Mastic Thermal Insulation Coatings
C421-08 Standard Test Method for Tumbling Friability of Preformed Block-Type and Preformed Pipe-Covering-Type Thermal Insulation
C423-08a Standard Test Method for Sound Absorption and Sound Absorption Coefficients by the Reverberation Room Method
C424-93(2006) Standard Test Method for Crazing Resistance of Fired Glazed Whitewares by Autoclave Treatment
C425-04 Standard Specification for Compression Joints for Vitrified Clay Pipe and Fittings
C426-07 Standard Test Method for Linear Drying Shrinkage of Concrete Masonry Units
C428-05(2006) Standard Specification for Asbestos-Cement Nonpressure Sewer Pipe
C429-01(2006) Standard Test Method for Sieve Analysis of Raw Materials for Glass Manufacture
C430-08 Standard Test Method for Fineness of Hydraulic Cement by the 45-μm (No. 325) Sieve
C441-05 Standard Test Method for Effectiveness of Pozzolans or Ground Blast-Furnace Slag in Preventing Excessive Expansion of Concrete Due to the Alkali-Silica Reaction
C443-05a Standard Specification for Joints for Concrete Pipe and Manholes, Using Rubber Gaskets
C443M-07 Standard Specification for Joints for Concrete Pipe and Manholes, Using Rubber Gaskets [Metric]
C444M-03 Standard Specification for Perforated Concrete Pipe [Metric]
C444-03 Standard Specification for Perforated Concrete Pipe
C447-03 Standard Practice for Estimating the Maximum Use Temperature of Thermal Insulations
C448-88(2006) Standard Test Methods for Abrasion Resistance of Porcelain Enamels
C449-07 Standard Specification for Mineral Fiber Hydraulic-Setting Thermal Insulating and Finishing Cement
C450-08 Standard Practice for Fabrication of Thermal Insulating Fitting Covers for NPS Piping, and Vessel Lagging
C451-08 Standard Test Method for Early Stiffening of Hydraulic Cement (Paste Method)
C452-06 Standard Test Method for Potential Expansion of Portland-Cement Mortars Exposed to Sulfate
C454-83(2007) Standard Practice for Disintegration of Carbon Refractories by Alkali
C455-07 Standard Classification of Chrome, Chrome-Magnesia, Magnesia-Chrome, and Magnesia Brick
C456-93(2008) Standard Test Method for Hydration Resistance of Basic Bricks and Shapes
C457-08d Standard Test Method for Microscopical Determination of Parameters of the Air-Void System in Hardened Concrete
C458-98(2006) Standard Test Method for Organic Fiber Content of Asbestos-Cement Products
C459-97(2006) Standard Test Methods for Asbestos-Cement Flat Products
C461-81(2008) Standard Test Methods for Mastics and Coatings Used With Thermal Insulation
C465-99(2005) Standard Specification for Processing Additions for Use in the Manufacture of Hydraulic Cements
C466-03(2008) Standard Specification for Chemically Setting Silicate and Silica Chemical-Resistant Mortars
C467-97(2008) Standard Classification of Mullite Refractories
C469-02e1 Standard Test Method for Static Modulus of Elasticity and Poisson's Ratio of Concrete in Compression
C470/C470M-08 Standard Specification for Molds for Forming Concrete Test Cylinders Vertically
C471M-01(2006)e1 Standard Test Methods for Chemical Analysis of Gypsum and Gypsum Products [Metric]
C472-99(2004) Standard Test Methods for Physical Testing of Gypsum, Gypsum Plasters and Gypsum Concrete
C473-07 Standard Test Methods for Physical Testing of Gypsum Panel Products
C474-05 Standard Test Methods for Joint Treatment Materials for Gypsum Board Construction
C475/C475M-02(2007) Standard Specification for Joint Compound and Joint Tape for Finishing Gypsum Board
C476-08 Standard Specification for Grout for Masonry
C478-09 Standard Specification for Precast Reinforced Concrete Manhole Sections
C478M-09 Standard Specification for Precast Reinforced Concrete Manhole Sections (Metric)
C479-04(2008) Standard Specification for Vitrified Clay Liner Plates
C480/C480M-08 Standard Test Method for Flexure Creep of Sandwich Constructions
C481-99(2005) Standard Test Method for Laboratory Aging of Sandwich Constructions
C482-02(2009) Standard Test Method for Bond Strength of Ceramic Tile to Portland Cement Paste
C484-99(2003) Standard Test Method for Thermal Shock Resistance of Glazed Ceramic Tile
C485-09 Standard Test Method for Measuring Warpage of Ceramic Tile
C488-05 Standard Test Method for Conducting Exterior Exposure Tests of Finishes for Thermal Insulation
C490/C490M-08 Standard Practice for Use of Apparatus for the Determination of Length Change of Hardened Cement Paste, Mortar, and Concrete
C492-92(2008) Standard Test Method for Hydration of Granular Dead-Burned Refractory Dolomite
C494/C494M-08a Standard Specification for Chemical Admixtures for Concrete
C494/C494M-08 Especificación Normalizada de Aditivos Químicos para Concreto
C495-07 Standard Test Method for Compressive Strength of Lightweight Insulating Concrete
C496/C496M-04e1 Standard Test Method for Splitting Tensile Strength of Cylindrical Concrete Specimens
C496/C496M-04e1 Método de Ensayo Normalizado para Resistencia a la Tracción indirecta de Especimenes Cilíndricos de Concreto
C497-05 Standard Test Methods for Concrete Pipe, Manhole Sections, or Tile
C497M-05 Standard Test Methods for Concrete Pipe, Manhole Sections, or Tile [Metric]
C499-09 Standard Test Method for Facial Dimensions and Thickness of Flat, Rectangular Ceramic Wall and Floor Tile
C500-07 Standard Test Methods for Asbestos-Cement Pipe
C501-84(2002) Standard Test Method for Relative Resistance to Wear of Unglazed Ceramic Tile by the Taber Abraser
C502-09 Standard Test Method for Wedging of Flat, Rectangular Ceramic Wall and Floor Tile
C503-08a Standard Specification for Marble Dimension Stone
C505-05a Standard Specification for Nonreinforced Concrete Irrigation Pipe with Rubber Gasket Joints
C505M-05a Standard Specification for Nonreinforced Concrete Irrigation Pipe With Rubber Gasket Joints [Metric]
C506-08a Standard Specification for Reinforced Concrete Arch Culvert, Storm Drain, and Sewer Pipe
C506M-08a Standard Specification for Reinforced Concrete Arch Culvert, Storm Drain, and Sewer Pipe (Metric)
C507-08a Standard Specification for Reinforced Concrete Elliptical Culvert, Storm Drain, and Sewer Pipe
C507M-08a Standard Specification for Reinforced Concrete Elliptical Culvert, Storm Drain, and Sewer Pipe (Metric)
C508-00(2004) Standard Specification for Asbestos-Cement Underdrain Pipe
C509-06 Standard Specification for Elastomeric Cellular Preformed Gasket and Sealing Material
C510-05a Standard Test Method for Staining and Color Change of Single- or Multicomponent Joint Sealants
C511-06 Standard Specification for Mixing Rooms, Moist Cabinets, Moist Rooms, and Water Storage Tanks Used in the Testing of Hydraulic Cements and Concretes
C512-02 Standard Test Method for Creep of Concrete in Compression
C514-04 Standard Specification for Nails for the Application of Gypsum Board
C515-95(2007) Standard Specification for Chemical-Resistant Ceramic Tower Packings
C516-08 Standard Specification for Vermiculite Loose Fill Thermal Insulation
C518-04 Standard Test Method for Steady-State Thermal Transmission Properties by Means of the Heat Flow Meter Apparatus
C520-04 Standard Test Methods for Density of Granular Loose Fill Insulations
C522-03 Standard Test Method for Airflow Resistance of Acoustical Materials
C530-99(2005) Standard Specification for Structural Clay Nonloadbearing Screen Tile
C531-00(2005) Standard Test Method for Linear Shrinkage and Coefficient of Thermal Expansion of Chemical-Resistant Mortars, Grouts, Monolithic Surfacings, and Polymer Concretes
C533-07 Standard Specification for Calcium Silicate Block and Pipe Thermal Insulation
C534/C534M-08 Standard Specification for Preformed Flexible Elastomeric Cellular Thermal Insulation in Sheet and Tubular Form
C535-03e1 Standard Test Method for Resistance to Degradation of Large-Size Coarse Aggregate by Abrasion and Impact in the Los Angeles Machine
C536-83(2004)e1 Standard Test Method for Continuity of Coatings in Glassed Steel Equipment by Electrical Testing
C537-87(2004)e1 Standard Test Method for Reliability of Glass Coatings on Glassed Steel Reaction Equipment by High Voltage
C538-83(2004)e1 Standard Test Method for Color Retention of Red, Orange, and Yellow Porcelain Enamels
C539-84(2006) Standard Test Method for Linear Thermal Expansion of Porcelain Enamel and Glaze Frits and Ceramic Whiteware Materials by Interferometric Method
C541-98(2006) Standard Specification for Linings for Asbestos-Cement Pipe
C542-05 Standard Specification for Lock-Strip Gaskets
C544-03(2008) Standard Test Method for Hydration of Dead Burned Magnesite or Periclase Grain
C545-97(2007) Standard Classification of Zircon Refractories
C547-07e1 Standard Specification for Mineral Fiber Pipe Insulation
C549-06 Standard Specification for Perlite Loose Fill Insulation
C550-03 Standard Test Method for Measuring Trueness and Squareness of Rigid Block and Board Thermal Insulation
C551-07 Standard Specification for Asbestos-Cement Fiberboard Insulating Panels
C552-07 Standard Specification for Cellular Glass Thermal Insulation
C553-08 Standard Specification for Mineral Fiber Blanket Thermal Insulation for Commercial and Industrial Applications
C554-93(2006) Standard Test Method for Crazing Resistance of Fired Glazed Ceramic Whitewares by a Thermal Shock Method
C557-03e1 Standard Specification for Adhesives for Fastening Gypsum Wallboard to Wood Framing
C559-90(2005) Standard Test Method for Bulk Density by Physical Measurements of Manufactured Carbon and Graphite Articles
C560-88(2005)e1 Standard Test Methods for Chemical Analysis of Graphite
C561-91(2005) Standard Test Method for Ash in a Graphite Sample
C562-91(2005) Standard Test Method for Moisture in a Graphite Sample
C563-07 Standard Test Method for Approximation of Optimum SO3 in Hydraulic Cement Using Compressive Strength
C564-08 Standard Specification for Rubber Gaskets for Cast Iron Soil Pipe and Fittings
C565-93(2005) Standard Test Methods for Tension Testing of Carbon and Graphite Mechanical Materials
C566-97(2004) Standard Test Method for Total Evaporable Moisture Content of Aggregate by Drying
C567-05a Standard Test Method for Determining Density of Structural Lightweight Concrete
C567-05a Método Normalizado de Ensayo para la Determinación de la Densidad de Concreto Estructural Liviano
C568-08a Standard Specification for Limestone Dimension Stone
C577-07 Standard Test Method for Permeability of Refractories
C578-08b Standard Specification for Rigid, Cellular Polystyrene Thermal Insulation
C579-01(2006) Standard Test Methods for Compressive Strength of Chemical-Resistant Mortars, Grouts, Monolithic Surfacings, and Polymer Concretes
C580-02(2008) Standard Test Method for Flexural Strength and Modulus of Elasticity of Chemical-Resistant Mortars, Grouts, Monolithic Surfacings, and Polymer Concretes
C581-03(2008)e1 Standard Practice for Determining Chemical Resistance of Thermosetting Resins Used in Glass-Fiber-Reinforced Structures Intended for Liquid Service
C582-02 Standard Specification for Contact-Molded Reinforced Thermosetting Plastic (RTP) Laminates for Corrosion-Resistant Equipment
C583-05 Standard Test Method for Modulus of Rupture of Refractory Materials at Elevated Temperatures
C584-81(2006) Standard Test Method for Specular Gloss of Glazed Ceramic Whitewares and Related Products
C585-90(2004) Standard Practice for Inner and Outer Diameters of Rigid Thermal Insulation for Nominal Sizes of Pipe and Tubing (NPS System)
C586-05 Standard Test Method for Potential Alkali Reactivity of Carbonate Rocks as Concrete Aggregates (Rock-Cylinder Method)
C587-04 Standard Specification for Gypsum Veneer Plaster
C591-08a Standard Specification for Unfaced Preformed Rigid Cellular Polyisocyanurate Thermal Insulation
C592-08a Standard Specification for Mineral Fiber Blanket Insulation and Blanket-Type Pipe Insulation (Metal-Mesh Covered) (Industrial Type)
C593-06 Standard Specification for Fly Ash and Other Pozzolans for Use With Lime for Soil Stabilization
C595-08a Standard Specification for Blended Hydraulic Cements
C595-08 Especificación Normalizada para Cementos Adicionados Hidráulicos
C596-07 Standard Test Method for Drying Shrinkage of Mortar Containing Hydraulic Cement
C597-02 Standard Test Method for Pulse Velocity Through Concrete
C598-93(2008) Standard Test Method for Annealing Point and Strain Point of Glass by Beam Bending
C600-85(2005) Standard Test Method of Thermal Shock Test on Glass Pipe
C601-85(2005) Standard Test Method for Pressure Test on Glass Pipe
C602-07 Standard Specification for Agricultural Liming Materials
C603-04(2008) Standard Test Method for Extrusion Rate and Application Life of Elastomeric Sealants
C604-02(2007) Standard Test Method for True Specific Gravity of Refractory Materials by Gas-Comparison Pycnometer
C607-88(2005) Standard Practice for Coking Large Shapes of Carbon-Bearing Materials
C609-07 Standard Test Method for Measurement of Light Reflectance Value and Small Color Differences Between Pieces of Ceramic Tile
C610-07 Standard Specification for Molded Expanded Perlite Block and Pipe Thermal Insulation
C611-98(2005)e1 Standard Test Method for Electrical Resistivity of Manufactured Carbon and Graphite Articles at Room Temperature
C612-04e1 Standard Specification for Mineral Fiber Block and Board Thermal Insulation
C613/C613M-97(2008) Standard Test Method for Constituent Content of Composite Prepreg by Soxhlet Extraction
C614-74(2005) Standard Test Method for Alkali Resistance of Porcelain Enamels
C615-03 Standard Specification for Granite Dimension Stone
C616-08 Standard Specification for Quartz-Based Dimension Stone
C617-98(2003) Standard Practice for Capping Cylindrical Concrete Specimens
C618-08a Standard Specification for Coal Fly Ash and Raw or Calcined Natural Pozzolan for Use in Concrete
C618-08a Especificación normalizada para Ceniza Volante de Carbón y Puzolana Natural en Crudo o Calcinada para Uso en Concreto
C621-84(2001) Standard Test Method for Isothermal Corrosion Resistance of Refractories to Molten Glass
C623-92(2005) Standard Test Method for Young's Modulus, Shear Modulus, and Poisson's Ratio for Glass and Glass-Ceramics by Resonance
C625-95(2005) Standard Practice for Reporting Irradiation Results on Graphite
C627-93(2007) Standard Test Method for Evaluating Ceramic Floor Tile Installation Systems Using the Robinson-Type Floor Tester
C629-08 Standard Specification for Slate Dimension Stone
C631-95a(2004) Standard Specification for Bonding Compounds for Interior Gypsum Plastering
C632-88(2006) Standard Test Method for Reboiling Tendency of Sheet Steel for Porcelain Enameling
C633-01(2008) Standard Test Method for Adhesion or Cohesion Strength of Thermal Spray Coatings
C634-08a Standard Terminology Relating to Building and Environmental Acoustics
C635/C635M-07 Standard Specification for the Manufacture, Performance, and Testing of Metal Suspension Systems for Acoustical Tile and Lay-in Panel Ceilings
C636/C636M-08 Standard Practice for Installation of Metal Ceiling Suspension Systems for Acoustical Tile and Lay-In Panels
C637-98a(2003) Standard Specification for Aggregates for Radiation-Shielding Concrete
C638-92(2002) Standard Descriptive Nonmenclature of Constituents of Aggregates for Radiation-Shielding Concrete
C639-01(2007) Standard Test Method for Rheological (Flow) Properties of Elastomeric Sealants
C641-07 Standard Test Method for Iron Staining Materials in Lightweight Concrete Aggregates
C642-06 Standard Test Method for Density, Absorption, and Voids in Hardened Concrete
C645-08a Standard Specification for Nonstructural Steel Framing Members
C647-08 Standard Guide to Properties and Tests of Mastics and Coating Finishes for Thermal Insulation
C648-04(2009) Standard Test Method for Breaking Strength of Ceramic Tile
C650-04 Standard Test Method for Resistance of Ceramic Tile to Chemical Substances
C651-91(2005)e1 Standard Test Method for Flexural Strength of Manufactured Carbon and Graphite Articles Using Four-Point Loading at Room Temperature
C652-07 Standard Specification for Hollow Brick (Hollow Masonry Units Made From Clay or Shale)
C653-97(2007) Standard Guide for Determination of the Thermal Resistance of Low-Density Blanket-Type Mineral Fiber Insulation
C654-05a Standard Specification for Porous Concrete Pipe
C654M-05a Standard Specification for Porous Concrete Pipe [Metric]
C655M-04e1 Standard Specification for Reinforced Concrete D-Load Culvert, Storm Drain, and Sewer Pipe [Metric]
C655-07 Standard Specification for Reinforced Concrete D-Load Culvert, Storm Drain, and Sewer Pipe
C656-07 Standard Specification for Structural Insulating Board, Calcium Silicate
C657-93(2008) Standard Test Method for D-C Volume Resistively of Glass
C658-98(2008) Standard Specification for Chemical-Resistant Resin Grouts for Brick or Tile
C659-90(2008) Standard Specification for Asbestos-Cement Organic-Foam Core Insulating Panels
C660-81(2005) Standard Practices for Production and Preparation of Gray Iron Castings for Porcelain Enameling
C661-06 Standard Test Method for Indentation Hardness of Elastomeric-Type Sealants by Means of a Durometer
C662-70(2005) Standard Specification for Impervious Graphite Pipe and Threading
C663-98(2008) Standard Specification for Asbestos-Cement Storm Drain Pipe
C664-87(2005) Standard Test Methods for Thickness of Diffusion Coating
C665-06 Standard Specification for Mineral-Fiber Blanket Thermal Insulation for Light Frame Construction and Manufactured Housing
C666/C666M-03(2008) Standard Test Method for Resistance of Concrete to Rapid Freezing and Thawing
C667-01 Standard Specification for Prefabricated Reflective Insulation Systems for Equipment and Pipe Operating at Temperatures above Ambient Air
C668-98(2008) Standard Specification for Asbestos-Cement Transmission Pipe
C670-03 Standard Practice for Preparing Precision and Bias Statements for Test Methods for Construction Materials
C672/C672M-03 Standard Test Method for Scaling Resistance of Concrete Surfaces Exposed to Deicing Chemicals
C673-97(2008) Standard Classification of Fireclay and High-Alumina Plastic Refractories and Ramming Mixes
C674-88(2006) Standard Test Methods for Flexural Properties of Ceramic Whiteware Materials
C675-91(2006) Standard Test Method for Alkali Resistance of Ceramic Decorations on Returnable Beverage Glass Containers
C676-04 Standard Test Method for Detergent Resistance of Ceramic Decorations on Glass Tableware
C679-03 Standard Test Method for Tack-Free Time of Elastomeric Sealants
C680-08 Standard Practice for Estimate of the Heat Gain or Loss and the Surface Temperatures of Insulated Flat, Cylindrical, and Spherical Systems by Use of Computer Programs
C681-03 Standard Test Method for Volatility of Oil- and Resin-Based, Knife-Grade, Channel Glazing Compounds
C684-99(2003) Standard Test Method for Making, Accelerated Curing, and Testing Concrete Compression Test Specimens
C685/C685M-07 Standard Specification for Concrete Made by Volumetric Batching and Continuous Mixing
C686-90(2007) Standard Test Method for Parting Strength of Mineral Fiber Batt- and Blanket-Type Insulation
C687-07 Standard Practice for Determination of Thermal Resistance of Loose-Fill Building Insulation
C688-08 Standard Specification for Functional Additions for Use in Hydraulic Cements
C689-09 Standard Test Method for Modulus of Rupture of Unfired Clays
C690-09 Standard Test Method for Particle Size Distribution of Alumina or Quartz by Electric Sensing Zone Technique
C692-08 Standard Test Method for Evaluating the Influence of Thermal Insulations on External Stress Corrosion Cracking Tendency of Austenitic Stainless Steel
C693-93(2008) Standard Test Method for Density of Glass by Buoyancy
C694-90a(2006) Standard Test Method for Weight Loss (Mass Loss) of Sheet Steel During Immersion in Sulfuric Acid Solution
C695-91(2005) Standard Test Method for Compressive Strength of Carbon and Graphite
C696-99(2005) Standard Test Methods for Chemical, Mass Spectrometric, and Spectrochemical Analysis of Nuclear-Grade Uranium Dioxide Powders and Pellets
C697-04 Standard Test Methods for Chemical, Mass Spectrometric, and Spectrochemical Analysis of Nuclear-Grade Plutonium Dioxide Powders and Pellets
C698-04 Standard Test Methods for Chemical, Mass Spectrometric, and Spectrochemical Analysis of Nuclear-Grade Mixed Oxides ((U, Pu)O2)
C700-07a Standard Specification for Vitrified Clay Pipe, Extra Strength, Standard Strength, and Perforated
C702-98(2003) Standard Practice for Reducing Samples of Aggregate to Testing Size
C703-72(2006) Standard Test Methods for Spalling Resistance of Porcelain Enameled Aluminum
C704-07 Standard Test Method for Abrasion Resistance of Refractory Materials at Room Temperature
C706-02(2008)e1 Standard Specification for Limestone for Animal Feed Use
C708-08 Specification for Nuclear-Grade Beryllium Oxide Powder
C709-06 Standard Terminology Relating to Manufactured Carbon and Graphite
C711-03 Standard Test Method for Low-Temperature Flexibility and Tenacity of One-Part, Elastomeric, Solvent-Release Type Sealants
C712-03 Standard Test Method for Bubbling of One-Part, Elastomeric, Solvent-Release Type Sealants
C714-05e1 Standard Test Method for Thermal Diffusivity of Carbon and Graphite by Thermal Pulse Method
C715-90(2006) Standard Test Method for Nickel on Steel for Porcelain Enameling by Photometric Analysis
C716-06 Standard Specification for Installing Lock-Strip Gaskets and Infill Glazing Materials
C717-09 Standard Terminology of Building Seals and Sealants
C719-93(2005) Standard Test Method for Adhesion and Cohesion of Elastomeric Joint Sealants Under Cyclic Movement (Hockman Cycle)
C722-04 Standard Specification for Chemical-Resistant Monolithic Floor Surfacings
C723-98(2008) Standard Practice for Chemical-Resistant Resin Grouts for Brick or Tile
C724-91(2005) Standard Test Method for Acid Resistance of Ceramic Decorations on Architectural-Type Glass
C725-90(2008) Standard Specification for Semidense Mineral Fiber Siding
C726-05e1 Standard Specification for Mineral Fiber Roof Insulation Board
C727-01(2007)e1 Standard Practice for Installation and Use of Reflective Insulation in Building Constructions
C728-05 Standard Specification for Perlite Thermal Insulation Board
C729-05 Standard Test Method for Density of Glass by the Sink-Float Comparator
C730-98(2008) Standard Test Method for Knoop Indentation Hardness of Glass
C731-00(2006) Standard Test Method for Extrudability, After Package Aging, of Latex Sealants
C732-06 Standard Test Method for Aging Effects of Artificial Weathering on Latex Sealants
C734-06 Standard Test Method for Low-Temperature Flexibility of Latex Sealants After Artificial Weathering
C735-04 Standard Test Method for Acid Resistance of Ceramic Decorations on Returnable Beer and Beverage Glass Containers
C736-00(2006)e1 Standard Test Method for Extension-Recovery and Adhesion of Latex Sealants
C737-08 Standard Specification for Limestone for Dusting of Coal Mines
C738-94(2006) Standard Test Method for Lead and Cadmium Extracted from Glazed Ceramic Surfaces
C739-08 Standard Specification for Cellulosic Fiber Loose-Fill Thermal Insulation
C740-97(2004) Standard Practice for Evacuated Reflective Insulation In Cryogenic Service
C743-87(2004)e1 Standard Test Method for Continuity of Porcelain Enamel Coatings
C744-08 Standard Specification for Prefaced Concrete and Calcium Silicate Masonry Units
C746-90(2008) Standard Specification for Corrugated Asbestos-Cement Sheets for Bulkheading
C747-93(2005) Standard Test Method for Moduli of Elasticity and Fundamental Frequencies of Carbon and Graphite Materials by Sonic Resonance
C748-98(2005) Standard Test Method for Rockwell Hardness of Graphite Materials
C749-08 Standard Test Method for Tensile Stress-Strain of Carbon and Graphite
C750-03 Standard Specification for Nuclear-Grade Boron Carbide Powder
C751-07 Standard Specification for Nuclear-Grade Boron Carbide Pellets
C752-03 Standard Specification for Nuclear-Grade Silver-Indium-Cadmium Alloy
C753-04 Standard Specification for Nuclear-Grade, Sinterable Uranium Dioxide Powder
C754-08 Standard Specification for Installation of Steel Framing Members to Receive Screw-Attached Gypsum Panel Products
C755-03 Standard Practice for Selection of Water Vapor Retarders for Thermal Insulation
C756-87(2006) Standard Test Method for Cleanability of Surface Finishes
C757-06 Standard Specification for Nuclear-Grade Plutonium Dioxide Powder, Sinterable
C758-04 Standard Test Methods for Chemical, Mass Spectrometric, Spectrochemical, Nuclear, and Radiochemical Analysis of Nuclear-Grade Plutonium Metal
C759-04 Standard Test Methods for Chemical, Mass Spectrometric, Spectrochemical, Nuclear, and Radiochemical Analysis of Nuclear-Grade Plutonium Nitrate Solutions
C760-90(2007) Standard Test Methods for Chemical and Spectrochemical Analysis of Nuclear-Grade Silver-Indium-Cadmium Alloys
C761-04e1 Standard Test Methods for Chemical, Mass Spectrometric, Spectrochemical, Nuclear, and Radiochemical Analysis of Uranium Hexafluoride
C764-07 Standard Specification for Mineral Fiber Loose-Fill Thermal Insulation
C765-97(2007) Standard Test Method for Low-Temperature Flexibility of Preformed Tape Sealants
C767-93(2004) Standard Test Method for Thermal Conductivity of Carbon Refractories
C769-98(2005) Standard Test Method for Sonic Velocity in Manufactured Carbon and Graphite Materials for Use in Obtaining an Approximate Young's Modulus
C770-98(2008) Standard Test Method for Measurement of Glass Stress—Optical Coefficient
C771-03 Standard Test Method for Weight Loss After Heat Aging of Preformed Sealing Tapes
C772-03 Standard Test Method for Oil Migration or Plasticizer Bleed-Out of Preformed Tape Sealants
C773-88(2006) Standard Test Method for Compressive (Crushing) Strength of Fired Whiteware Materials
C774-88(2006) Standard Test Method for Yield Strength of Enameling Steels After Straining and Firing
C776-06 Standard Specification for Sintered Uranium Dioxide Pellets
C777-04 Standard Test Method for Sulfide Resistance of Ceramic Decorations on Glass
C778-06 Standard Specification for Standard Sand
C779/C779M-05 Standard Test Method for Abrasion Resistance of Horizontal Concrete Surfaces
C780-08a Standard Test Method for Preconstruction and Construction Evaluation of Mortars for Plain and Reinforced Unit Masonry
C781-08 Standard Practice for Testing Graphite and Boronated Graphite Materials for High-Temperature Gas-Cooled Nuclear Reactor Components
C782-03 Standard Test Method for Softness of Preformed Tape Sealants
C783-85(2005) Standard Practice for Core Sampling of Graphite Electrodes
C784-05 Standard Specification for Nuclear-Grade Aluminum Oxide-Boron Carbide Composite Pellets
C785-08 Standard Specification for Nuclear-Grade Aluminum Oxide Pellets
C786-96(2003) Standard Test Method for Fineness of Hydraulic Cement and Raw Materials by the 300-μm (No. 50), 150-μm (No. 100), and 75-μm (No. 200) Sieves by Wet Methods
C787-06 Standard Specification for Uranium Hexafluoride for Enrichment
C788-03 Standard Specification for Nuclear-Grade Uranyl Nitrate Solution or Crystals
C791-04 Standard Test Methods for Chemical, Mass Spectrometric, and Spectrochemical Analysis of Nuclear-Grade Boron Carbide
C792-04(2008) Standard Test Method for Effects of Heat Aging on Weight Loss, Cracking, and Chalking of Elastomeric Sealants
C793-05 Standard Test Method for Effects of Laboratory Accelerated Weathering on Elastomeric Joint Sealants
C794-06 Standard Test Method for Adhesion-in-Peel of Elastomeric Joint Sealants
C795-08 Standard Specification for Thermal Insulation for Use in Contact with Austenitic Stainless Steel
C796-04 Standard Test Method for Foaming Agents for Use in Producing Cellular Concrete Using Preformed Foam
C799-99(2005) Standard Test Methods for Chemical, Mass Spectrometric, Spectrochemical, Nuclear, and Radiochemical Analysis of Nuclear-Grade Uranyl Nitrate Solutions
C800-08 Standard Specification for Glass Fiber Blanket Insulation (Aircraft Type)
C802-96(2008)e1 Standard Practice for Conducting an Interlaboratory Test Program to Determine the Precision of Test Methods for Construction Materials
C803/C803M-03 Standard Test Method for Penetration Resistance of Hardened Concrete
C805/C805M-08 Standard Test Method for Rebound Number of Hardened Concrete
C806-04 Standard Test Method for Restrained Expansion of Expansive Cement Mortar
C807-08 Standard Test Method for Time of Setting of Hydraulic Cement Mortar by Modified Vicat Needle
C808-75(2005) Standard Guideline for Reporting Friction and Wear Test Results of Manufactured Carbon and Graphite Bearing and Seal Materials
C809-94(2007) Standard Test Methods for Chemical, Mass Spectrometric, and Spectrochemical Analysis of Nuclear-Grade Aluminum Oxide and AluminumOxide-Boron Carbide Composite Pellets
C810-90(2006) Standard Test Method for Nickel on Steel for Porcelain Enameling by X-Ray Emission Spectrometry
C811-98(2008) Standard Practice for Surface Preparation of Concrete for Application of Chemical-Resistant Resin Monolithic Surfacings
C813-90(2004) Standard Test Method for Hydrophobic Contamination on Glass by Contact Angle Measurement
C816-85(2005) Standard Test Method for Sulfur in Graphite by Combustion-Iodometric Titration Method
C821-78(2000) Standard Specification for Lime for Use with Pozzolans
C822-08b Standard Terminology Relating to Concrete Pipe and Related Products
C823/C823M-07 Standard Practice for Examination and Sampling of Hardened Concrete in Constructions
C824-91(2005) Standard Practice for Specimen Preparation for Determination of Linear Thermal Expansion of Vitreous Glass Enamels and Glass Enamel Frits by the Dilatometer Method
C825-06 Standard Specification for Precast Concrete Barriers
C827-01a(2005) Standard Test Method for Change in Height at Early Ages of Cylindrical Specimens of Cementitious Mixtures
C828-06 Standard Test Method for Low-Pressure Air Test of Vitrified Clay Pipe Lines
C829-81(2005) Standard Practices for Measurement of Liquidus Temperature of Glass by the Gradient Furnace Method
C830-00(2006) Standard Test Methods for Apparent Porosity, Liquid Absorption, Apparent Specific Gravity, and Bulk Density of Refractory Shapes by Vacuum Pressure
C831-98(2008) Standard Test Methods for Residual Carbon, Apparent Residual Carbon, and Apparent Carbon Yield in Coked Carbon-Containing Brick and Shapes
C832-00(2005) Standard Test Method of Measuring Thermal Expansion and Creep of Refractories Under Load
C833-01(2008) Standard Specification for Sintered (Uranium-Plutonium) Dioxide Pellets
C834-05 Standard Specification for Latex Sealants
C835-06 Standard Test Method for Total Hemispherical Emittance of Surfaces up to 1400°C
C836-06 Standard Specification for High Solids Content, Cold Liquid-Applied Elastomeric Waterproofing Membrane for Use with Separate Wearing Course
C837-09 Standard Test Method for Methylene Blue Index of Clay
C838-96(2005) Standard Test Method for Bulk Density of As-Manufactured Carbon and Graphite Shapes
C839-82(2005) Standard Test Method for Compressive Stress of Porcelain Enamels by Loaded-Beam Method
C840-08 Standard Specification for Application and Finishing of Gypsum Board
C841-03(2008)e1 Standard Specification for Installation of Interior Lathing and Furring
C842-05 Standard Specification for Application of Interior Gypsum Plaster
C843-99(2006) Standard Specification for Application of Gypsum Veneer Plaster
C844-04 Standard Specification for Application of Gypsum Base to Receive Gypsum Veneer Plaster
C845-04 Standard Specification for Expansive Hydraulic Cement
C845-04 Especificación Normalizada para Cemento Hidráulico Expansivo
C846-94(2003) Standard Practice for Application of Cellulosic Fiber Insulating Board for Wall Sheathing
C847-06 Standard Specification for Metal Lath
C848-88(2006) Standard Test Method for Young's Modulus, Shear Modulus, and Poisson's Ratio For Ceramic Whitewares by Resonance
C849-88(2006) Standard Test Method for Knoop Indentation Hardness of Ceramic Whitewares
C856-04 Standard Practice for Petrographic Examination of Hardened Concrete
C857-07 Standard Practice for Minimum Structural Design Loading for Underground Precast Concrete Utility Structures
C858-09 Standard Specification for Underground Precast Concrete Utility Structures
C859-09 Standard Terminology Relating to Nuclear Materials
C860-00(2005) Standard Practice for Determining the Consistency of Refractory Castable Using the Ball-In-Hand Test
C861-93(2005) Standard Practice for Determining Metric Dimensions of Standard Series Refractory Brick and Shapes
C862-02(2008) Standard Practice for Preparing Refractory Concrete Specimens by Casting
C863-00(2005) Standard Test Method for Evaluating Oxidation Resistance of Silicon Carbide Refractories at Elevated Temperatures
C864-05 Standard Specification for Dense Elastomeric Compression Seal Gaskets, Setting Blocks, and Spacers
C865-02(2007) Standard Practice for Firing Refractory Concrete Specimens
C866-77(2006) Standard Test Method for Filtration Rate of Ceramic Whiteware Clays
C867-94(2007) Standard Test Method for Soluble Sulfate in Ceramic Whiteware Clays (Photometric Method)
C868-02(2008) Standard Test Method for Chemical Resistance of Protective Linings
C869-91(2006) Standard Specification for Foaming Agents Used in Making Preformed Foam for Cellular Concrete
C870-96(2004) Standard Practice for Conditioning of Thermal Insulating Materials
C871-08a Standard Test Methods for Chemical Analysis of Thermal Insulation Materials for Leachable Chloride, Fluoride, Silicate, and Sodium Ions
C872-89(2005) Standard Test Method for Lead and Cadmium Release from Porcelain Enamel Surfaces
C873/C873M-04e1 Standard Test Method for Compressive Strength of Concrete Cylinders Cast in Place in Cylindrical Molds
C874-99(2004) Standard Practice for Rotary Slag Testing of Refractory Materials
C875-98(2008) Standard Specification for Asbestos-Cement Conduit
C877M-02e1 Standard Specification for External Sealing Bands for Concrete Pipe, Manholes, and Precast Box Sections [Metric]
C877-08 Standard Specification for External Sealing Bands for Concrete Pipe, Manholes, and Precast Box Sections
C878/C878M-03 Standard Test Method for Restrained Expansion of Shrinkage-Compensating Concrete
C879-03 Standard Test Methods for Release Papers Used With Preformed Tape Sealants
C880-06 Standard Test Method for Flexural Strength of Dimension Stone
C881/C881M-02 Standard Specification for Epoxy-Resin-Base Bonding Systems for Concrete
C882/C882M-05e1 Standard Test Method for Bond Strength of Epoxy-Resin Systems Used With Concrete By Slant Shear
C884/C884M-98(2005) Standard Test Method for Thermal Compatibility Between Concrete and an Epoxy-Resin Overlay
C885-87(2007) Standard Test Method for Young's Modulus of Refractory Shapes by Sonic Resonance
C886-98(2005) Standard Test Method for Scleroscope Hardness Testing of Carbon and Graphite Materials
C887-05 Standard Specification for Packaged, Dry, Combined Materials for Surface Bonding Mortar
C888-03(2008) Standard Specification for Nuclear-Grade Gadolinium Oxide (Gd2O3) Powder
C889-06 Standard Test Methods for Chemical and Mass Spectrometric Analysis of Nuclear-Grade Gadolinium Oxide (Gd2O3) Powder
C890-06 Standard Practice for Minimum Structural Design Loading for Monolithic or Sectional Precast Concrete Water and Wastewater Structures
C891-90(2003) Standard Practice for Installation of Underground Precast Concrete Utility Structures
C892-05 Standard Specification for High-Temperature Fiber Blanket Thermal Insulation
C895-87(2003) Standard Test Method for Lead and Cadmium Extracted from Glazed Ceramic Tile
C896-04 Standard Terminology Relating to Clay Products
C897-05 Standard Specification for Aggregate for Job-Mixed Portland Cement-Based Plasters
C898-01 Standard Guide for Use of High Solids Content, Cold Liquid-Applied Elastomeric Waterproofing Membrane With Separate Wearing Course
C899-79(2007) Standard Practice for Use of Metric Units of Measure for Reporting Properties of Refractory Materials (COMMITTEE C-8 SUPPLEMENT TO E 380)
C900-06 Standard Test Method for Pullout Strength of Hardened Concrete
C901-01 Standard Specification for Prefabricated Masonry Panels
C902-09 Standard Specification for Pedestrian and Light Traffic Paving Brick
C903-08 Standard Practice for Preparing Refractory Castable Specimens by Cold Gunning
C904-01(2006) Standard Terminology Relating to Chemical-Resistant Nonmetallic Materials
C905-01(2006) Standard Test Methods for Apparent Density of Chemical-Resistant Mortars, Grouts, Monolithic Surfacings, and Polymer Concretes
C907-03(2008) Standard Test Method for Tensile Adhesive Strength of Preformed Tape Sealants by Disk Method
C908-00(2006) Standard Test Method for Yield Strength of Preformed Tape Sealants
C909-93(2005) Standard Practice for Dimensions of a Modular Series of Refractory Brick and Shapes
C910-06 Standard Test Method for Bond and Cohesion of One-Part Elastomeric Solvent Release-Type Sealants
C911-06 Standard Specification for Quicklime, Hydrated Lime, and Limestone for Selected Chemical and Industrial Uses
C912-93(2008) Standard Practice for Designing a Process for Cleaning Technical Glasses
C913-08 Standard Specification for Precast Concrete Water and Wastewater Structures
C914-95(2004) Standard Test Method for Bulk Density and Volume of Solid Refractories by Wax Immersion
C915-79(2002) Standard Specification for Precast Reinforced Concrete Crib Wall Members
C916-85(2007) Standard Specification for Adhesives for Duct Thermal Insulation
C917-05 Standard Test Method for Evaluation of Cement Strength Uniformity From a Single Source
C918/C918M-07 Standard Test Method for Measuring Early-Age Compressive Strength and Projecting Later-Age Strength
C919-08 Standard Practice for Use of Sealants in Acoustical Applications
C920-08 Standard Specification for Elastomeric Joint Sealants
C921-03a Standard Practice for Determining the Properties of Jacketing Materials for Thermal Insulation
C922-08 Standard Specification for Sintered Gadolinium Oxide-Uranium Dioxide Pellets
C923-08 Standard Specification for Resilient Connectors Between Reinforced Concrete Manhole Structures, Pipes, and Laterals
C923M-08b Standard Specification for Resilient Connectors Between Reinforced Concrete Manhole Structures, Pipes, and Laterals (Metric)
C924-02 Standard Practice for Testing Concrete Pipe Sewer Lines by Low-Pressure Air Test Method
C924M-02 Standard Practice for Testing Concrete Pipe Sewer Lines by Low-Pressure Air Test Method (Metric)
C925-09 Standard Guide for Precision Electroformed Wet Sieve Analysis of Nonplastic Ceramic Powders
C926-06 Standard Specification for Application of Portland Cement-Based Plaster
C927-80(2004) Standard Test Method for Lead and Cadmium Extracted from the Lip and Rim Area of Glass Tumblers Externally Decorated with Ceramic Glass Enamels
C928/C928M-08 Standard Specification for Packaged, Dry, Rapid-Hardening Cementitious Materials for Concrete Repairs
C929-94(2004)e1 Standard Practice for Handling, Transporting, Shipping, Storage, Receiving, and Application of Thermal Insulation Materials For Use in Contact with Austenitic Stainless Steel
C930-05 Standard Classification of Potential Health and Safety Concerns Associated With Thermal Insulation Materials and Accessories
C932-06 Standard Specification for Surface-Applied Bonding Compounds for Exterior Plastering
C933-07b Standard Specification for Welded Wire Lath
C935-80(2002) Standard Specification for General Requirements for Prestressed Concrete Poles Statically Cast
C936-08 Standard Specification for Solid Concrete Interlocking Paving Units
C937-02 Standard Specification for Grout Fluidifier for Preplaced-Aggregate Concrete
C938-02 Standard Practice for Proportioning Grout Mixtures for Preplaced-Aggregate Concrete
C939-02 Standard Test Method for Flow of Grout for Preplaced-Aggregate Concrete (Flow Cone Method)
C940-98a(2003) Standard Test Method for Expansion and Bleeding of Freshly Mixed Grouts for Preplaced-Aggregate Concrete in the Laboratory
C941-02 Standard Test Method for Water Retentivity of Grout Mixtures for Preplaced-Aggregate Concrete in the Laboratory
C942-99(2004) Standard Test Method for Compressive Strength of Grouts for Preplaced-Aggregate Concrete in the Laboratory
C943-02 Standard Practice for Making Test Cylinders and Prisms for Determining Strength and Density of Preplaced-Aggregate Concrete in the Laboratory
C944/C944M-99(2005)e1 Standard Test Method for Abrasion Resistance of Concrete or Mortar Surfaces by the Rotating-Cutter Method
C945-05 Standard Practice for Design Considerations and Spray Application of a Rigid Cellular Polyurethane Insulation System on Outdoor Service Vessels
C946-91(2001) Standard Practice for Construction of Dry-Stacked, Surface-Bonded Walls
C947-03 Standard Test Method for Flexural Properties of Thin-Section Glass-Fiber-Reinforced Concrete (Using Simple Beam With Third-Point Loading)
C948-81(2001) Standard Test Method for Dry and Wet Bulk Density, Water Absorption, and Apparent Porosity of Thin Sections of Glass-Fiber Reinforced Concrete
C949-80(2007) Standard Test Method for Porosity in Vitreous Whitewares by Dye Penetration
C950/C950M-08 Standard Practice for Repair of a Rigid Cellular Polyurethane Insulation System on Outdoor Service Vessels
C952-02e1 Standard Test Method for Bond Strength of Mortar to Masonry Units
C953-06 Standard Test Method for Time of Setting of Grouts for Preplaced-Aggregate Concrete in the Laboratory
C954-07 Standard Specification for Steel Drill Screws for the Application of Gypsum Panel Products or Metal Plaster Bases to Steel Studs from 0.033 in. (0.84 mm) to 0.112 in. (2.84 mm) in Thickness
C955-08a Standard Specification for Load-Bearing (Transverse and Axial) Steel Studs, Runners (Tracks), and Bracing or Bridging for Screw Application of Gypsum Panel Products and Metal Plaster Bases
C956-04 Standard Specification for Installation of Cast-In-Place Reinforced Gypsum Concrete
C957-06 Standard Specification for High-Solids Content, Cold Liquid-Applied Elastomeric Waterproofing Membrane With Integral Wearing Surface
C958-92(2007) Standard Test Method for Particle Size Distribution of Alumina or Quartz by X-Ray Monitoring of Gravity Sedimentation
C961-06 Standard Test Method for Lap Shear Strength of Sealants
C963-00(2007) Standard Specification for Packaging, Identification, Shipment, and Storage of Lock-Strip Gaskets
C964-07 Standard Guide for Lock-Strip Gasket Glazing
C965-96(2007) Standard Practice for Measuring Viscosity of Glass Above the Softening Point
C966-98(2008) Standard Guide for Installing Asbestos-Cement Nonpressure Pipe
C967-08 Standard Specification for Uranium Ore Concentrate
C968-06 Standard Test Methods for Analysis of Sintered Gadolinium Oxide-Uranium Dioxide Pellets
C969-02 Standard Practice for Infiltration and Exfiltration Acceptance Testing of Installed Precast Concrete Pipe Sewer Lines
C969M-02 Standard Practice for Infiltration and Exfiltration Acceptance Testing of Installed Precast Concrete Pipe Sewer Lines [Metric]
C970-87(2006) Standard Practice for Sampling Special Nuclear Materials in Multi-Container Lots
C972-00(2006) Standard Test Method for Compression-Recovery of Tape Sealant
C973-87(2004) Standard Practice for Preparing Test Specimens From Basic Refractory Gunning Products by Pressing
C974-87(2004) Standard Practice for Preparing Test Specimens from Basic Refractory Castable Products by Casting
C975-87(2004) Standard Practice for Preparing Test Specimens from Basic Refractory Ramming Products by Pressing
C977-03 Standard Specification for Quicklime and Hydrated Lime for Soil Stabilization
C978-04 Standard Test Method for Photoelastic Determination of Residual Stress in a Transparent Glass Matrix Using a Polarizing Microscope and Optical Retardation Compensation Procedures
C979-05 Standard Specification for Pigments for Integrally Colored Concrete
C980-88(2007) Standard Specification for Industrial Chimney Lining Brick
C981-05 Standard Guide for Design of Built-Up Bituminous Membrane Waterproofing Systems for Building Decks
C985-04e1 Standard Specification for Nonreinforced Concrete Specified Strength Culvert, Storm Drain, and Sewer Pipe
C985M-04e1 Standard Specification for Nonreinforced Concrete Specified Strength Culvert, Storm Drain, and Sewer Pipe [Metric]
C987-00a(2005) Standard Practice for Vapor Attack on Refractories for Furnace Superstructures
C989-09 Standard Specification for Slag Cement for Use in Concrete and Mortars
C989-06 Especificación Normalizada para Escoria Granulada de Alto Horno Molida para Uso en Concreto y Morteros
C990-08 Standard Specification for Joints for Concrete Pipe, Manholes, and Precast Box Sections Using Preformed Flexible Joint Sealants
C990M-08 Standard Specification for Joints for Concrete Pipe, Manholes, and Precast Box Sections Using Preformed Flexible Joint Sealants (Metric)
C991-08e1 Standard Specification for Flexible Fibrous Glass Insulation for Metal Buildings
C992-06 Standard Specification for Boron-Based Neutron Absorbing Material Systems for Use in Nuclear Spent Fuel Storage Racks
C993-97(2003) Standard Guide for In-Plant Performance Evaluation of Automatic Pedestrian SNM Monitors
C996-04e1 Standard Specification for Uranium Hexafluoride Enriched to Less Than 5 % 235U
C998-05 Standard Practice for Sampling Surface Soil for Radionuclides
C999-05 Standard Practice for Soil Sample Preparation for the Determination of Radionuclides
C1000-05 Standard Test Method for Radiochemical Determination of Uranium Isotopes in Soil by Alpha Spectrometry
C1001-05 Standard Test Method for Radiochemical Determination of Plutonium in Soil by Alpha Spectroscopy
C1002-07 Standard Specification for Steel Self-Piercing Tapping Screws for the Application of Gypsum Panel Products or Metal Plaster Bases to Wood Studs or Steel Studs
C1005-05 Standard Specification for Reference Masses and Devices for Determining Mass and Volume for Use in the Physical Testing of Hydraulic Cements
C1006-07 Standard Test Method for Splitting Tensile Strength of Masonry Units
C1007-08a Standard Specification for Installation of Load Bearing (Transverse and Axial) Steel Studs and Related Accessories
C1008-99(2008) Standard Specification for Sintered (Uranium-Plutonium) Dioxide
Pellets—Fast Reactor Fuel
C1009-06 Standard Guide for Establishing a Quality Assurance Program for Analytical Chemistry Laboratories Within the Nuclear Industry
C1012-04 Standard Test Method for Length Change of Hydraulic-Cement Mortars Exposed to a Sulfate Solution
C1014-08 Standard Specification for Spray-Applied Mineral Fiber Thermal and Sound Absorbing Insulation
C1015-06 Standard Practice for Installation of Cellulosic and Mineral Fiber Loose-Fill Thermal Insulation
C1016-02(2008) Standard Test Method for Determination of Water Absorption of Sealant Backing
(Joint Filler) Material
C1017/C1017M-07 Standard Specification for Chemical Admixtures for Use in Producing Flowing Concrete
C1017/C1017M-07 Especificación Normalizada para Aditivos Químicos para Uso en la Producción de Concreto Fluido
C1019-09 Standard Test Method for Sampling and Testing Grout
C1021-08 Standard Practice for Laboratories Engaged in Testing of Building Sealants
C1022-05 Standard Test Methods for Chemical and Atomic Absorption Analysis of Uranium-Ore Concentrate
C1023-09 Standard Practice for Labeling Ceramic Art Materials for Chronic Adverse Health Hazards
C1025-91(2005) Standard Test Method for Modulus of Rupture in Bending of Electrode Graphite
C1026-87(2002) Standard Test Method for Measuring the Resistance of Ceramic Tile to Freeze-Thaw Cycling
C1027-99(2004) Standard Test Method for Determining Visible Abrasion Resistance of Glazed Ceramic Tile
C1028-07 Standard Test Method for Determining the Static Coefficient of Friction of Ceramic Tile and Other Like Surfaces by the Horizontal Dynamometer Pull-Meter Method
C1029-08 Standard Specification for Spray-Applied Rigid Cellular Polyurethane Thermal Insulation
C1030-03 Standard Test Method for Determination of Plutonium Isotopic Composition by Gamma-Ray Spectrometry
C1031-05 Standard Specification for Nuclear-Grade Aluminum Oxide Powder
C1032-06 Standard Specification for Woven Wire Plaster Base
C1036-06 Standard Specification for Flat Glass
C1037-08 Standard Practice for Inspection of Underground Precast Concrete Utility Structures
C1038-04 Standard Test Method for Expansion of Hydraulic Cement Mortar Bars Stored in Water
C1039-85(2005) Standard Test Methods for Apparent Porosity, Apparent Specific Gravity, and Bulk Density of Graphite Electrodes
C1040/C1040M-08 Standard Test Methods for In-Place Density of Unhardened and Hardened Concrete, Including Roller Compacted Concrete, By Nuclear Methods
C1041-85(2007) Standard Practice for In-Situ Measurements of Heat Flux in Industrial Thermal Insulation Using Heat Flux Transducers
C1043-06 Standard Practice for Guarded-Hot-Plate Design Using Circular Line-Heat Sources
C1044-07 Standard Practice for Using a Guarded-Hot-Plate Apparatus or Thin-Heater Apparatus in the Single-Sided Mode
C1045-07 Standard Practice for Calculating Thermal Transmission Properties Under Steady-State Conditions
C1046-95(2007) Standard Practice for In-Situ Measurement of Heat Flux and Temperature on Building Envelope Components
C1047-05 Standard Specification for Accessories for Gypsum Wallboard and Gypsum Veneer Base
C1048-04 Standard Specification for Heat-Treated Flat Glass—Kind HS, Kind FT Coated and Uncoated Glass
C1052-01(2007) Standard Practice for Bulk Sampling of Liquid Uranium Hexafluoride
C1053-00(2005) Standard Specification for Borosilicate Glass Pipe and Fittings for Drain, Waste, and Vent (DWV) Applications
C1054-03(2008) tandard Practice for Pressing and Drying Refractory Plastic and Ramming Mix Specimens
C1055-03 Standard Guide for Heated System Surface Conditions That Produce Contact Burn Injuries
C1057-03 Standard Practice for Determination of Skin Contact Temperature from Heated Surfaces Using A Mathematical Model and Thermesthesiometer
C1058-03(2008) Standard Practice for Selecting Temperatures for Evaluating and Reporting Thermal Properties of Thermal Insulation
C1059/C1059M-99(2008) Standard Specification for Latex Agents for Bonding Fresh To Hardened Concrete
C1060-90(2003) Standard Practice for Thermographic Inspection of Insulation Installations in Envelope Cavities of Frame Buildings
C1062-00(2008) Standard Guide for Design, Fabrication, and Installation of Nuclear Fuel Dissolution Facilities
C1063-08 Standard Specification for Installation of Lathing and Furring to Receive Interior and Exterior Portland Cement-Based Plaster
C1064/C1064M-08 Standard Test Method for Temperature of Freshly Mixed Hydraulic-Cement Concrete
C1065-08 Standard Specification for Nuclear-Grade Zirconium Oxide Powder
C1066-97(2004) Standard Specification for Nuclear Grade Zirconium Oxide Pellets
C1067-00(2007) Standard Practice for Conducting A Ruggedness or Screening Program for Test Methods for Construction Materials
C1068-03 Standard Guide for Qualification of Measurement Methods by a Laboratory Within the Nuclear Industry
C1069-09 Standard Test Method for Specific Surface Area of Alumina or Quartz by Nitrogen Adsorption
C1070-01(2007) Standard Test Method for Determining Particle Size Distribution of Alumina or Quartz by Laser Light Scattering
C1071-05e1 Standard Specification for Fibrous Glass Duct Lining Insulation (Thermal and Sound Absorbing Material)
C1072-06 Standard Test Method for Measurement of Masonry Flexural Bond Strength
C1073-97a(2003) Standard Test Method for Hydraulic Activity of Ground Slag by Reaction with Alkali
C1074-04 Standard Practice for Estimating Concrete Strength by the Maturity Method
C1075-93(2004) Standard Practices for Sampling Uranium-Ore Concentrate
C1076-97(2004) Standard Specification for Nuclear Grade Hafnium Oxide Pellets
C1077-08a Standard Practice for Laboratories Testing Concrete and Concrete Aggregates for Use in Construction and Criteria for Laboratory Evaluation
C1080-98(2008) Standard Specification for Asbestos-Cement Products Other Than Fill For Cooling Towers
C1081-98(2008) Standard Specification for Asbestos-Cement Corrugated Fill For Use in Cooling Towers
C1082-98(2008) Standard Specification for Asbestos-Cement Flat Sheet for Cooling Tower Fill
C1083-06 Standard Test Method for Water Absorption of Cellular Elastomeric Gaskets and Sealing Materials
C1084-02 Standard Test Method for Portland-Cement Content of Hardened Hydraulic-Cement Concrete
C1086-08 Standard Specification for Glass Fiber Mechanically Bonded Felt Thermal Insulation
C1087-00(2006) Standard Test Method for Determining Compatibility of Liquid-Applied Sealants with Accessories Used in Structural Glazing Systems
C1088-09 Standard Specification for Thin Veneer Brick Units Made From Clay or Shale
C1089-06 Standard Specification for Spun Cast Prestressed Concrete Poles
C1090-01(2005)e1 Standard Test Method for Measuring Changes in Height of Cylindrical Specimens of Hydraulic-Cement Grout
C1091-03a(2008) Standard Test Method for Hydrostatic Infiltration Testing of Vitrified Clay Pipe Lines
C1093-08 Standard Practice for Accreditation of Testing Agencies for Masonry
C1094-01(2006) Standard Guide for Flexible Removable Insulation Covers
C1096-07 Standard Test Method for Determination of Wood Fiber in Asbestos Cement
C1097-07 Standard Specification for Hydrated Lime for Use in Asphalt Cement or Bituminous Pavements
C1098-08 Standard Specification for Nuclear-Grade Hafnium Oxide Powder
C1099-07 Standard Test Method for Modulus of Rupture of Carbon-Containing Refractory Materials at Elevated Temperatures
C1101/C1101M-06 Standard Test Methods for Classifying the Flexibility or Rigidity of Mineral Fiber Blanket and Board Insulation
C1103-03 Standard Practice for Joint Acceptance Testing of Installed Precast Concrete Pipe Sewer Lines
C1103M-03 Standard Practice for Joint Acceptance Testing of Installed Precast Concrete Pipe Sewer Lines [Metric]
C1104/C1104M-00(2006) Standard Test Method for Determining the Water Vapor Sorption of Unfaced Mineral Fiber Insulation
C1105-08a Standard Test Method for Length Change of Concrete Due to Alkali-Carbonate Rock Reaction
C1106-00(2005) Standard Test Methods for Chemical Resistance and Physical Properties of Carbon Brick
C1107/C1107M-08 Standard Specification for Packaged Dry, Hydraulic-Cement Grout (Nonshrink)
C1108-99(2006) Standard Test Method for Plutonium by Controlled-Potential Coulometry
C1109-04 Standard Practice for Analysis of Aqueous Leachates from Nuclear Waste Materials Using Inductively Coupled Plasma-Atomic Emission Spectrometry
C1110-03(2008) Standard Practice for Sample Preparation for X-Ray Emission Spectrometric Analysis of Uranium in Ores Using the Glass Fusion or Pressed Powder Method
C1111-04 Standard Test Method for Determining Elements in Waste Streams by Inductively Coupled Plasma-Atomic Emission Spectroscopy
C1112-99(2005) Standard Guide for Application of Radiation Monitors to the Control and Physical Security of Special Nuclear Material
C1113-99(2004) Standard Test Method for Thermal Conductivity of Refractories by Hot Wire (Platinum Resistance Thermometer Technique)
C1114-06 Standard Test Method for Steady-State Thermal Transmission Properties by Means of the Thin-Heater Apparatus
C1115-06 Standard Specification for Dense Elastomeric Silicone Rubber Gaskets and Accessories
C1116/C1116M-08a Standard Specification for Fiber-Reinforced Concrete
C1118-07 Standard Guide for Selecting Components for Wavelength-Dispersive X-Ray Fluorescence (XRF) Systems
C1119-90(2004)e1 Standard Test Method for Vacuum Drainage of Asbestos-Cement Mixes
C1120-98(2006) Standard Test Method for Wash Test of Asbestos
C1121-04e1 Standard Test Method for Turner and Newall (T and N) Wet-Length Classification of Asbestos
C1122-90(2004)e1 Standard Test Method for Wet Volume of Asbestos
C1123-90(2004)e1 Standard Test Method for Compressibility and Recovery of Asbestos
C1124-90(2004)e1 Standard Test Method for Kerosene Retention of Asbestos
C1125-89(2004)e1 Standard Test Method for Penetration Index of Asbestos
C1126-04 Standard Specification for Faced or Unfaced Rigid Cellular Phenolic Thermal Insulation
C1127-01(2009) Standard Guide for Use of High Solids Content, Cold Liquid-Applied Elastomeric Waterproofing Membrane with an Integral Wearing Surface
C1128-01(2008) Standard Guide for Preparation of Working Reference Materials for Use in Analysis of Nuclear Fuel Cycle Materials
C1129-89(2008) Standard Practice for Estimation of Heat Savings by Adding Thermal Insulation to Bare Valves and Flanges
C1130-07 Standard Practice for Calibrating Thin Heat Flux Transducers
C1131-95(2007) Standard Practice for Least Cost (Life Cycle) Analysis of Concrete Culvert, Storm Sewer, and Sanitary Sewer Systems
C1133-03 Standard Test Method for Nondestructive Assay of Special Nuclear Material in Low Density Scrap and Waste by Segmented Passive Gamma-Ray Scanning
C1134-90(2007) Standard Test Method for Water Retention of Rigid Thermal Insulations Following Partial Immersion
C1135-00(2005) Standard Test Method for Determining Tensile Adhesion Properties of Structural Sealants
C1136-08 Standard Specification for Flexible, Low Permeance Vapor Retarders for Thermal Insulation
C1137-05 Standard Test Method for Degradation of Fine Aggregate Due to Attrition
C1138M-05 Standard Test Method for Abrasion Resistance of Concrete (Underwater Method)
C1139-08 Standard Specification for Fibrous Glass Thermal Insulation and Sound Absorbing Blanket and Board for Military Applications
C1140-03a Standard Practice for Preparing and Testing Specimens from Shotcrete Test Panels
C1141/C1141M-08 Standard Specification for Admixtures for Shotcrete
C1142-95(2007) Standard Specification for Extended Life Mortar for Unit Masonry
C1144-89(2004) Standard Test Method for Splitting Tensile Strength for Brittle Nuclear Waste Forms
C1145-06 Standard Terminology of Advanced Ceramics
C1146-96(2003) Standard Guide for Prefabricated Panel Insulation Systems for Ducts and Equipment Operating at Temperatures Above Ambient Air
C1147-01(2006) Standard Practice for Determining the Short Term Tensile Weld Strength of Chemical-Resistant Thermoplastics
C1148-92a(2008) Standard Test Method for Measuring the Drying Shrinkage of Masonry Mortar
C1149-08 Standard Specification for Self-Supported Spray Applied Cellulosic Thermal Insulation
C1152/C1152M-04e1 Standard Test Method for Acid-Soluble Chloride in Mortar and Concrete
C1153-97(2003)e1 Standard Practice for Location of Wet Insulation in Roofing Systems Using Infrared Imaging
C1154-06 Standard Terminology for Non-Asbestos Fiber-Reinforced Cement Products
C1155-95(2007) Standard Practice for Determining Thermal Resistance of Building Envelope Components from the In-Situ Data
C1156-03 Standard Guide for Establishing Calibration for a Measurement Method Used to Analyze Nuclear Fuel Cycle Materials
C1157-08a Standard Performance Specification for Hydraulic Cement
C1157 Especificación Normalizada de Desempe?o para Cemento Hidráulico
C1158-05 Standard Practice for Installation and Use of Radiant Barrier Systems (RBS) in Building Construction
C1159-98(2008) Standard Specification for Sulfur Polymer Cement and Sulfur Modifier for Use in Chemical-Resistant, Rigid Sulfur Concrete
C1160-97(2008) Standard Specification for Chemical-Resistant Carbon Brick
C1161-02c(2008)e1 Standard Test Method for Flexural Strength of Advanced Ceramics at Ambient Temperature
C1162-90(2004)e1 Standard Test Method for Loose Density of Asbestos
C1163-08 Standard Practice for Mounting Actinides for Alpha Spectrometry Using Neodymium Fluoride
C1164-92(2003) Standard Practice for Evaluation of Limestone or Lime Uniformity From a Single Source
C1165-90(2005) Standard Test Method for Determining Plutonium by Controlled-Potential Coulometry in H 2SO4 at a Platinum Working Electrode
C1166-06 Standard Test Method for Flame Propagation of Dense and Cellular Elastomeric Gaskets and Accessories
C1167-03 Standard Specification for Clay Roof Tiles
C1168-08 Standard Practice for Preparation and Dissolution of Plutonium Materials for Analysis
C1169-97(2003) Standard Guide for Laboratory Evaluation of Automatic Pedestrian SNM Monitor Performance
C1170/C1170M-08 Standard Test Method for Determining Consistency and Density of Roller-Compacted Concrete Using a Vibrating Table
C1171-05 Standard Test Method for Quantitatively Measuring the Effect of Thermal Shock and Thermal Cycling on Refractories
C1172-03 Standard Specification for Laminated Architectural Flat Glass
C1173-08 Standard Specification for Flexible Transition Couplings for Underground Piping Systems
C1174-07 Standard Practice for Prediction of the Long-Term Behavior of Materials, Including Waste Forms, Used in Engineered Barrier Systems (EBS) for Geological Disposal of High-Level Radioactive Waste
C1175-99a(2004) Standard Guide to Test Methods and Standards for Nondestructive Testing of Advanced Ceramics
C1176/C1176M-08 Standard Practice for Making Roller-Compacted Concrete in Cylinder Molds Using a Vibrating Table
C1177/C1177M-08 Standard Specification for Glass Mat Gypsum Substrate for Use as Sheathing
C1178/C1178M-08 Standard Specification for Coated Glass Mat Water-Resistant Gypsum Backing Panel
C1179-91(2005) Standard Test Method for Oxidation Mass Loss of Manufactured Carbon and Graphite Materials in Air
C1180-07 Standard Terminology of Mortar and Grout for Unit Masonry
C1181-00(2005) Standard Test Methods for Compressive Creep of Chemical-Resistant Polymer Machinery Grouts
C1182-09 Standard Test Method for Determining the Particle Size Distribution of Alumina by Centrifugal Photosedimentation
C1183-04(2008) Standard Test Method for Extrusion Rate of Elastomeric Sealants
C1184-05 Standard Specification for Structural Silicone Sealants
C1185-08 Standard Test Methods for Sampling and Testing Non-Asbestos Fiber-Cement Flat Sheet, Roofing and Siding Shingles, and Clapboards
C1186-08 Standard Specification for Flat Fiber-Cement Sheets
C1187-07 Standard Guide for Establishing Surveillance Test Program for Boron-Based Neutron Absorbing Material Systems for Use in Nuclear Spent Fuel Storage Racks
C1188-04 Standard Guide for Establishing a Quality Assurance Program for Uranium Conversion Facilities1
C1189-02 Standard Guide to Procedures for Calibrating Automatic Pedestrian SNM Monitors
C1190-95(2005) Standard Practice for Location of Test Specimens from Magnesia-Carbon and Impregnated Burned Basic Brick
C1193-09 Standard Guide for Use of Joint Sealants
C1194-03 Standard Test Method for Compressive Strength of Architectural Cast Stone
C1195-03 Standard Test Method for Absorption of Architectural Cast Stone
C1196-04 Standard Test Method for In Situ Compressive Stress Within Solid Unit Masonry Estimated Using Flatjack Measurements
C1197-04 Standard Test Method for In Situ Measurement of Masonry Deformability Properties Using the Flatjack Method
C1198-08 Standard Test Method for Dynamic Young's Modulus, Shear Modulus, and Poisson's Ratio for Advanced Ceramics by Sonic Resonance
C1199-00 Standard Test Method for Measuring the Steady-State Thermal Transmittance of Fenestration Systems Using Hot Box Methods
C1201-91(2003) Standard Test Method for Structural Performance of Exterior Dimension Stone Cladding Systems by Uniform Static Air Pressure Difference
C1202-08 Standard Test Method for Electrical Indication of Concrete's Ability to Resist Chloride Ion Penetration
C1203-04 Standard Test Method for Quantitative Determination of Alkali Resistance of a Ceramic-Glass Enamel
C1204-02(2008)e1 Standard Test Method for Uranium in Presence of Plutonium by Iron(II) Reduction in Phosphoric Acid Followed by Chromium(VI) Titration
C1205-07 Standard Test Method for The Radiochemical Determination of Americium-241 in Soil by Alpha Spectrometry
C1206-02 Standard Test Method for Plutonium by Iron (II)/Chromium (VI) Amperometric Titration
C1207-03 Standard Test Method for Nondestructive Assay of Plutonium in Scrap and Waste by Passive Neutron Coincidence Counting
C1208/C1208M-08 Standard Specification for Vitrified Clay Pipe and Joints for Use in Microtunneling, Sliplining, Pipe Bursting, and Tunnels
C1210-06 Standard Guide for Establishing a Measurement System Quality Control Program for Analytical Chemistry Laboratories Within the Nuclear Industry
C1211-02(2008) Standard Test Method for Flexural Strength of Advanced Ceramics at Elevated Temperatures
C1212-98(2004) Standard Practice for Fabricating Ceramic Reference Specimens Containing Seeded Voids
C1214-02 Standard Test Method for Concrete Pipe Sewerlines by Negative Air Pressure (Vacuum) Test Method
C1214M-02 Standard Test Method for Concrete Pipe Sewerlines by Negative Air Pressure (Vacuum) Test Method [Metric]
C1215-92(2006) Standard Guide for Preparing and Interpreting Precision and Bias Statements in Test Method Standards Used in the Nuclear Industry
C1216-03(2008) Standard Test Method for Adhesion and Cohesion of One-Part Elastomeric Solvent Release Sealants
C1217-00(2006) Standard Guide for Design of Equipment for Processing Nuclear and Radioactive Materials
C1218/C1218M-99(2008) Standard Test Method for Water-Soluble Chloride in Mortar and Concrete
C1218/C1218M-99(2008) Método de Ensayo Normalizado para Cloruros Solubles en Agua en Mortero y Concreto
C1219-05 Standard Test Methods for Arsenic in Uranium Hexafluoride
C1220-98(2004) Standard Test Method for Static Leaching of Monolithic Waste Forms for Disposal of Radioactive Waste
C1221-92(2004) Standard Test Method for Nondestructive Analysis of Special Nuclear Materials in Homogeneous Solutions by Gamma-Ray Spectrometry
C1222-06 Standard Practice for Evaluation of Laboratories Testing Hydraulic Cement
C1223-92(2003) Standard Test Method for Testing of Glass Exudation from AZS Fusion-Cast Refractories
C1224-03 Standard Specification for Reflective Insulation for Building Applications
C1225-08 Standard Specification for Fiber-Cement Roofing Shingles, Shakes, and Slates
C1227-09 Standard Specification for Precast Concrete Septic Tanks
C1228-96(2004) Standard Practice for Preparing Coupons for Flexural and Washout Tests on Glass Fiber Reinforced Concrete
C1229-94(2001) Standard Test Method for Determination of Glass Fiber Content in Glass Fiber Reinforced Concrete (GFRC) (Wash-Out Test)
C1230-96(2004) Standard Test Method for Performing Tension Tests on Glass-Fiber Reinforced Concrete (GFRC) Bonding Pads
C1231/C1231M-09 Standard Practice for Use of Unbonded Caps in Determination of Compressive Strength of Hardened Concrete Cylinders
C1232-09 Standard Terminology of Masonry
C1233-03 Standard Practice for Determining Equivalent Boron Contents of Nuclear Materials
C1234-98(2004) Standard Practice for Preparation of Oils and Oily Waste Samples by High-Pressure, High-Temperature Digestion for Trace Element Determinations
C1236-99(2005) Standard Guide for In-Plant Performance Evaluation of Automatic Vehicle SNM Monitors
C1237-99(2005) Standard Guide to In-Plant Performance Evaluation of Hand-Held SNM Monitors
C1238-97(2003) Standard Guide for Installation of Walk-Through Metal Detectors
C1239-07 Standard Practice for Reporting Uniaxial Strength Data and Estimating Weibull Distribution Parameters for Advanced Ceramics
C1240-05 Standard Specification for Silica Fume Used in Cementitious Mixtures
C1240-05 Especificación Normalizada para Humo de sílice Utilizado en Mezclas Cementicias
C1241-00(2005) Standard Test Method for Volume Shrinkage of Latex Sealants During Cure
C1242-05 Standard Guide for Selection, Design, and Installation of Dimension Stone Anchoring Systems
C1243-93(2003) Standard Test Method for Relative Resistance to Deep Abrasive Wear of Unglazed Ceramic Tile by Rotating Disc
C1244-05ae1 Standard Test Method for Concrete Sewer Manholes by the Negative Air Pressure (Vacuum) Test Prior to Backfill
C1244M-05ae1 Standard Test Method for Concrete Sewer Manholes by the Negative Air Pressure (Vacuum) Test Prior to Backfill [Metric]
C1245/C1245M-06 Standard Test Method for Determining Bond Strength Between Hardened Roller Compacted Concrete and Other Hardened Cementitious Mixtures (Point Load Test)
C1246-00(2006) Standard Test Method for Effects of Heat Aging on Weight Loss, Cracking, and Chalking of Elastomeric Sealants After Cure
C1247-09 Standard Test Method for Durability of Sealants Exposed to Continuous Immersion in Liquids
C1248-08 Standard Test Method for Staining of Porous Substrate by Joint Sealants
C1249-06a Standard Guide for Secondary Seal for Sealed Insulating Glass Units for Structural Sealant Glazing Applications
C1250-05 Standard Test Method for Nonvolatile Content of Cold Liquid-Applied Elastomeric Waterproofing Membranes
C1252-06 Standard Test Methods for Uncompacted Void Content of Fine Aggregate (as Influenced by Particle Shape, Surface Texture, and Grading)
C1253-93(2005) Standard Test Method for Determining the Outgassing Potential of Sealant Backing
C1254-99(2005) Standard Test Method for Determination of Uranium in Mineral Acids by X-Ray Fluorescence
C1255-93(2005) Standard Test Method for Analysis of Uranium and Thorium in Soils by Energy Dispersive X-Ray Fluorescence Spectroscopy
C1256-93(2008) Standard Practice for Interpreting Glass Fracture Surface Features
C1257-06a Standard Test Method for Accelerated Weathering of Solvent-Release-Type Sealants
C1258-08 Standard Test Method for Elevated Temperature and Humidity Resistance of Vapor Retarders for Insulation
C1259-08 Standard Test Method for Dynamic Young's Modulus, Shear Modulus, and Poisson's Ratio for Advanced Ceramics by Impulse Excitation of Vibration
C1260-07 Standard Test Method for Potential Alkali Reactivity of Aggregates (Mortar-Bar Method)
C1261-07 Standard Specification for Firebox Brick for Residential Fireplaces
C1262-08a Standard Test Method for Evaluating the Freeze-Thaw Durability of Dry-Cast Segmental Retaining Wall Units and Related Concrete Units
C1263-95(2005) Standard Test Method for Thermal Integrity of Flexible Water Vapor Retarders
C1264-05 Standard Specification for Sampling, Inspection, Rejection, Certification, Packaging, Marking, Shipping, Handling, and Storage of Gypsum Board
C1265-94(2005)e1 Standard Test Method for Determining the Tensile Properties of an Insulating Glass Edge Seal for Structural Glazing Applications
C1266-02(2007) Standard Test Method for Flow Characteristics of Preformed Tape Sealants
C1267-06 Standard Test Method for Uranium by Iron (II) Reduction in Phosphoric Acid Followed by Chromium (VI) Titration in the Presence of Vanadium
C1268-94(2008) Standard Test Method for Quantitative Determination of Americium 241 in Plutonium by Gamma-Ray Spectrometry
C1269-97(2003) Standard Practice for Adjusting the Operational Sensitivity Setting of In-Plant Walk-Through Metal Detectors
C1270-97(2003) Standard Practice for Detection Sensitivity Mapping of In-Plant Walk-Through Metal Detectors
C1271-99(2006) Standard Test Method for X-ray Spectrometric Analysis of Lime and Limestone
C1272-07 Standard Specification for Heavy Vehicular Paving Brick
C1273-05 Standard Test Method for Tensile Strength of Monolithic Advanced Ceramics at Ambient Temperatures
C1274-00(2006) Standard Test Method for Advanced Ceramic Specific Surface Area by Physical Adsorption
C1275-00(2005)e1 Standard Test Method for Monotonic Tensile Behavior of Continuous Fiber-Reinforced Advanced Ceramics with Solid Rectangular Cross-Section Test Specimens at Ambient Temperature
C1276-94(2005) Standard Test Method for Measuring the Viscosity of Mold Powders Above Their Melting Point Using a Rotational Viscometer
C1277-08 Standard Specification for Shielded Couplings Joining Hubless Cast Iron Soil Pipe and Fittings
C1278/C1278M-07a Standard Specification for Fiber-Reinforced Gypsum Panel
C1279-05 Standard Test Method for Non-Destructive Photoelastic Measurement of Edge and Surface Stresses in Annealed, Heat-Strengthened, and Fully Tempered Flat Glass
C1280-07 Standard Specification for Application of Gypsum Sheathing
C1281-03 Standard Specification for Preformed Tape Sealants for Glazing Applications
C1282-08 Standard Test Method for Determining the Particle Size Distribution of Advanced Ceramics by Centrifugal Photosedimentation
C1283-07a Standard Practice for Installing Clay Flue Lining
C1284-00(2005) Standard Practice for Electrodeposition of the Actinides for Alpha Spectrometry
C1285-02(2008) Standard Test Methods for Determining Chemical Durability of Nuclear, Hazardous, and Mixed Waste Glasses and Multiphase Glass Ceramics: The Product Consistency Test (PCT)
C1287-03 Standard Test Method for Determination of Impurities in Uranium Dioxide by Inductively Coupled Plasma Mass Spectrometry
C1288-99(2004)e1 Standard Specification for Discrete Non-Asbestos Fiber-Cement Interior Substrate Sheets
C1289-08 Standard Specification for Faced Rigid Cellular Polyisocyanurate Thermal Insulation Board
C1290-06e1 Standard Specification for Flexible Fibrous Glass Blanket Insulation Used to Externally Insulate HVAC Ducts
C1291-00a(2005) Standard Test Method for Elevated Temperature Tensile Creep Strain, Creep Strain Rate, and Creep Time-to-Failure for Advanced Monolithic Ceramics
C1292-00(2005) Standard Test Method for Shear Strength of Continuous Fiber-Reinforced Advanced Ceramics at Ambient Temperatures
C1293-08b Standard Test Method for Determination of Length Change of Concrete Due to Alkali-Silica Reaction
C1294-07 Standard Test Method for Compatibility of Insulating Glass Edge Sealants with Liquid-Applied Glazing Materials
C1295-05 Standard Test Method for Gamma Energy Emission from Fission Products in Uranium Hexafluoride
C1297-03 Standard Guide for Qualification of Laboratory Analysts for the Analysis of Nuclear Fuel Cycle Materials
C1298-95(2007) Standard Guide for Design and Construction of Brick Liners for Industrial Chimneys
C1299-03 Standard Guide for Use in Selection of Liquid-Applied Sealants
C1300-95(2007) Standard Test Method for Linear Thermal Expansion of Glaze Frits and Ceramic Whiteware Materials by the Interferometric Method
C1301-95(2001) Standard Test Method for Major and Trace Elements in Limestone and Lime by Inductively Coupled Plasma-Atomic Emission Spectroscopy (ICP) and Atomic Absorption (AA)
C1302-04 Standard Guide for Selection and Use of Keywords for Thermal Insulation Test Methods and Standards
C1303-08e1 Standard Test Method for Predicting Long-Term Thermal Resistance of Closed-Cell Foam Insulation
C1304-08 Standard Test Method for Assessing the Odor Emission of Thermal Insulation Materials
C1305-08 Standard Test Method for Crack Bridging Ability of Liquid-Applied Waterproofing Membrane
C1306-08 Standard Test Method for Hydrostatic Pressure Resistance of a Liquid-Applied Waterproofing Membrane
C1307-02(2008) Standard Test Method for Plutonium Assay by Plutonium (III) Diode Array Spectrophotometry
C1308-08 Standard Test Method for Accelerated Leach Test for Diffusive Releases from Solidified Waste and a Computer Program to Model Diffusive, Fractional Leaching from Cylindrical Waste Forms
C1309-97(2003) Standard Practice for Performance Evaluation of In-Plant Walk-Through Metal Detectors
C1310-01(2007) Standard Test Method for Determining Radionuclides in Soils by Inductively Coupled Plasma-Mass Spectrometry Using Flow Injection Preconcentration
C1311-02 Standard Specification for Solvent Release Sealants
C1312-97(2008) Standard Practice for Making and Conditioning Chemical-Resistant Sulfur Polymer Cement Concrete Test Specimens in the Laboratory
C1313-05 Standard Specification for Sheet Radiant Barriers for Building Construction Applications
C1314-07 Standard Test Method for Compressive Strength of Masonry Prisms
C1315-08 Standard Specification for Liquid Membrane-Forming Compounds Having Special Properties for Curing and Sealing Concrete
C1316-08 Standard Test Method for Nondestructive Assay of Nuclear Material in Scrap and Waste by Passive-Active Neutron Counting Using 252Cf Shuffler
C1318-95(2001) Standard Test Method for Determination of Total Neutralizing Capability and Dissolved Calcium and Magnesium Oxide in Lime for Flue Gas Desulfurization (FGD)
C1319-01(2006) Standard Specification for Concrete Grid Paving Units
C1320-05 Standard Practice for Installation of Mineral Fiber Batt and Blanket Thermal Insulation for Light Frame Construction
C1321-04 Standard Practice for Installation and Use of Interior Radiation Control Coating Systems (IRCCS) in Building Construction
C1322-05be1 Standard Practice for Fractography and Characterization of Fracture Origins in Advanced Ceramics
C1323-96(2001)e1 Standard Test Method for Ultimate Strength of Advanced Ceramics with Diametrally Compressed C-Ring Specimens at Ambient Temperature
C1324-05 Standard Test Method for Examination and Analysis of Hardened Masonry Mortar
C1325-08b Standard Specification for Non-Asbestos Fiber-Mat Reinforced Cementitious Backer Units
C1326-08e1 Standard Test Method for Knoop Indentation Hardness of Advanced Ceramics
C1327-08 Standard Test Method for Vickers Indentation Hardness of Advanced Ceramics
C1328-05 Standard Specification for Plastic (Stucco) Cement
C1329-05 Standard Specification for Mortar Cement
C1330-02(2007) Standard Specification for Cylindrical Sealant Backing for Use with Cold Liquid Applied Sealants
C1331-01(2007) Standard Test Method for Measuring Ultrasonic Velocity in Advanced Ceramics with Broadband Pulse-Echo Cross-Correlation Method
C1332-01(2007) Standard Test Method for Measurement of Ultrasonic Attenuation Coefficients of Advanced Ceramics by Pulse-Echo Contact Technique
C1334-05e1 Standard Specification for Uranium Oxides with a 235U Content of Less Than 5 % for Dissolution Prior to Conversion to Nuclear-Grade Uranium Dioxide
C1335-04 Standard Test Method for Measuring Non-Fibrous Content of Man-Made Rock and Slag Mineral Fiber Insulation
C1336-96(2008) Standard Practice for Fabricating Non-Oxide Ceramic Reference Specimens Containing Seeded Inclusions
C1337-96(2005) Standard Test Method for Creep and Creep Rupture of Continuous Fiber-Reinforced Ceramic Composites under Tensile Loading at Elevated Temperatures
C1338-08 Standard Test Method for Determining Fungi Resistance of Insulation Materials and Facings
C1339-02(2008) Standard Test Method for Flowability and Bearing Area of Chemical-Resistant Polymer Machinery Grouts
C1340-04 Standard Practice for Estimation of Heat Gain or Loss Through Ceilings Under Attics Containing Radiant Barriers by Use of a Computer Program
C1341-06 Standard Test Method for Flexural Properties of Continuous Fiber-Reinforced Advanced Ceramic Composites
C1343-96(2007) Standard Test Method for Determination of Low Concentrations of Uranium in Oils and Organic Liquids by X-ray Fluorescence
C1344-97(2008) Standard Test Method for Isotopic Analysis of Uranium Hexafluoride by Single-Standard Gas Source Mass Spectrometer Method
C1345-08 Standard Test Method for Analysis of Total and Isotopic Uranium and Total Thorium in Soils by Inductively Coupled Plasma-Mass Spectrometry
C1346-08 Standard Practice for Dissolution of UF6 from P-10 Tubes ,
C1347-08 Standard Practice for Preparation and Dissolution of Uranium Materials for Analysis
C1348-01(2008) Standard Specification for Blended Uranium Oxides with 235U Content of Less Than 5 % for Direct Hydrogen Reduction to Nuclear Grade Uranium Dioxide
C1349-04 Standard Specification for Architectural Flat Glass Clad Polycarbonate
C1350M-96(2008) Standard Test Method for Measurement of Viscosity of Glass Between Softening Point and Annealing Range (Approximately 108 Pa·s to Approximately 10 13 Pa·s) by Beam Bending (Metric)
C1351M-96(2007) Standard Test Method for Measurement of Viscosity of Glass Between 104 Pa·s and 108 Pa·s by Viscous Compression of a Solid Right Cylinder [Metric]
C1352-96(2008) Standard Test Method for Flexural Modulus of Elasticity of Dimension Stone
C1353-08 Standard Test Method Using the Taber Abraser for Abrasion Resistance of Dimension Stone Subjected to Foot Traffic
C1354-96(2004) Standard Test Method for Strength of Individual Stone Anchorages in Dimension Stone
C1355/C1355M-96(2006) Standard Specification for Glass Fiber Reinforced Gypsum Composites
C1356-07 Standard Test Method for Quantitative Determination of Phases in Portland Cement Clinker by Microscopical Point-Count Procedure
C1357-05 Standard Test Methods for Evaluating Masonry Bond Strength
C1358-05 Standard Test Method for Monotonic Compressive Strength Testing of Continuous Fiber-Reinforced Advanced Ceramics with Solid Rectangular Cross-Section Test Specimens at Ambient Temperatures
C1359-05 Standard Test Method for Monotonic Tensile Strength Testing of Continuous Fiber-Reinforced Advanced Ceramics With Solid Rectangular Cross-Section Test Specimens at Elevated Temperatures
C1360-01(2007) Standard Practice for Constant-Amplitude, Axial, Tension-Tension Cyclic Fatigue of Continuous Fiber-Reinforced Advanced Ceramics at Ambient Temperatures
C1361-01(2007) Standard Practice for Constant-Amplitude, Axial, Tension-Tension Cyclic Fatigue of Advanced Ceramics at Ambient Temperatures
C1362-04 Standard Test Method for Flow of Freshly Mixed Hydraulic Cement Concrete
C1363-05 Standard Test Method for Thermal Performance of Building Materials and Envelope Assemblies by Means of a Hot Box Apparatus
C1364-07 Standard Specification for Architectural Cast Stone
C1365-06 Standard Test Method for Determination of the Proportion of Phases in Portland Cement and Portland-Cement Clinker Using X-Ray Powder Diffraction Analysis
C1366-04 Standard Test Method for Tensile Strength of Monolithic Advanced Ceramics at Elevated Temperatures
C1367-06 Standard Test Method for Dead Load Resistance of a Sealant in Elevated Temperatures
C1368-06 Standard Test Method for Determination of Slow Crack Growth Parameters of Advanced Ceramics by Constant Stress-Rate Flexural Testing at Ambient Temperature
C1369-07 Standard Specification for Secondary Edge Sealants for Structurally Glazed Insulating Glass Units
C1370-00(2005) Standard Test Method for Determining the Chemical Resistance of Aggregates for Use in Chemical-Resistant Sulfur Polymer Cement Concrete and Other Chemical-Resistant Polymer Concretes
C1371-04a Standard Test Method for Determination of Emittance of Materials Near Room Temperature Using Portable Emissometers
C1372-04e2 Standard Specification for Dry-Cast Segmental Retaining Wall Units
C1373-03 Standard Practice for Determination of Thermal Resistance of Attic Insulation Systems Under Simulated Winter Conditions
C1374-03 Standard Test Method for Determination of Installed Thickness of Pneumatically Applied Loose-Fill Building Insulation
C1375-00(2005) Standard Guide for Substrates Used in Testing Building Seals and Sealants
C1376-03 Standard Specification for Pyrolytic and Vacuum Deposition Coatings on Flat Glass
C1377-97(2003)e1 Standard Test Method for Calibration of Surface/Stress Measuring Devices
C1378-04 Standard Test Method for Determination of Resistance to Staining
C1379-04 Standard Test Method for Analysis of Urine for Uranium-235 and Uranium-238 Isotopes by Inductively Coupled Plasma-Mass Spectrometry
C1380-04 Standard Test Method for Determination of Uranium Content and Isotopic Composition by Isotope Dilution Mass Spectrometry
C1381/C1381M-97(2008)e1 Standard Specification for Molded Glass Fiber Reinforced Gypsum Parts
C1382-05 Test Method for Determining Tensile Adhesion Properties of Sealants When Used in Exterior Insulation and Finish Systems (EIFS) Joints
C1383-04 Standard Test Method for Measuring the P-Wave Speed and the Thickness of Concrete Plates Using the Impact-Echo Method
C1384-06a Standard Specification for Admixtures for Masonry Mortars
C1385/C1385M-98(2004)e1 Standard Practice for Sampling Materials for Shotcrete
C1386-07 Standard Specification for Precast Autoclaved Aerated Concrete (AAC) Wall Construction Units
C1387-08 Standard Guide for the Determination of Technetium-99 in Soil
C1392-00(2005) Standard Guide for Evaluating Failure of Structural Sealant Glazing
C1393-08 Standard Specification for Perpendicularly Oriented Mineral Fiber Roll and Sheet Thermal Insulation for Pipes and Tanks
C1394-03(2008) Standard Guide for In-Situ Structural Silicone Glazing Evaluation
C1396/C1396M-06a Standard Specification for Gypsum Board
C1397-05 Standard Practice for Application of Class PB Exterior Insulation and Finish Systems
C1398-07 Standard Test Method for The Laboratory Determination of the Time of Setting of Hydraulic-Cement Mortars Containing Additives for Shotcrete by the Use of Gillmore Needles
C1399-07a Standard Test Method for Obtaining Average Residual-Strength of Fiber-Reinforced Concrete
C1400-01(2007) Standard Guide for Reduction of Efflorescence Potential in New Masonry Walls
C1401-07 Standard Guide for Structural Sealant Glazing
C1402-04 Standard Guide for High-Resolution Gamma-Ray Spectrometry of Soil Samples
C1403-06 Standard Test Method for Rate of Water Absorption of Masonry Mortars
C1404/C1404M-98(2003) Standard Test Method for Bond Strength of Adhesive Systems Used with Concrete as Measured by Direct Tension
C1405-08 Standard Specification for Glazed Brick (Single Fired, Brick Units)
C1407-98(2005) Standard Practice for Calculating Areas, Volume, and Linear Change of Refractory Shapes
C1408-98(2004) Standard Test Method for Carbon (Total) in Uranium Oxide Powders and Pellets By Direct Combustion-Infrared Detection Method
C1409-08 Standard Guide for Measuring and Estimating Quantities of Insulated Piping and Components
C1410-05a Standard Specification for Cellular Melamine Thermal and Sound-Absorbing Insulation
C1411-08 Standard Practice for The Ion Exchange Separation of Uranium and Plutonium Prior to Isotopic Analysis
C1413-05 Standard Test Method for Isotopic Analysis of Hydrolyzed Uranium Hexafluoride and Uranyl Nitrate Solutions by Thermal Ionization Mass Spectrometry
C1414-01(2007) Standard Practice for The Separation of Americium from Plutonium by Ion Exchange
C1415-01a(2007) Standard Test Method for 238Pu Isotopic Abundance by Alpha Spectrometry
C1416-04 Standard Test Method for Uranium Analysis in Natural and Waste Water by X-Ray Fluorescence
C1417-08 Standard Specification for Manufacture of Reinforced Concrete Sewer, Storm Drain, and Culvert Pipe for Direct Design
C1417M-08 Standard Specification for Manufacture of Reinforced Concrete Sewer, Storm Drain, and Culvert Pipe for Direct Design [Metric]
C1419-99a(2004) Standard Test Method for Sonic Velocity in Refractory Materials at Room Temperature and Its Use in Obtaining an Approximate Young's Modulus
C1421-01b(2007) Standard Test Methods for Determination of Fracture Toughness of Advanced Ceramics at Ambient Temperature
C1422-99(2005)e1 Standard Specification for Chemically Strengthened Flat Glass
C1423-98(2003) Standard Guide for Selecting Jacketing Materials for Thermal Insulation
C1424-04 Standard Test Method for Monotonic Compressive Strength of Advanced Ceramics at Ambient Temperature
C1425-05 Standard Test Method for Interlaminar Shear Strength of 1-D and 2-D Continuous Fiber-Reinforced Advanced Ceramics at Elevated Temperatures
C1426-99(2004) Standard Practices for Verification and Calibration of Polarimeters
C1427-07 Standard Specification for Extruded Preformed Flexible Cellular Polyolefin Thermal Insulation in Sheet and Tubular Form
C1428-99(2005) Standard Test Method for Isotopic Analysis of Uranium Hexafluoride by Single-Standard Gas Source Multiple Collector Mass Spectrometer Method
C1429-99(2004) Standard Test Method for Isotopic Analysis of Uranium Hexafluoride by Double-Standard Multi-Collector Gas Mass Spectrometer
C1430-07 Standard Test Method for Determination of Uranium, Oxygen to Uranium (O/U), and Oxygen to Metal (O/M) in Sintered Uranium Dioxide and Gadolinia-Uranium Dioxide Pellets by Atmospheric Equilibration
C1431-99(2005) Standard Guide for Corrosion Testing of Aluminum-Based Spent Nuclear Fuel in Support of Repository Disposal
C1432-03(2008) Standard Test Method for Determination of Impurities in Plutonium: Acid Dissolution, Ion Exchange Matrix Separation, and Inductively Coupled Plasma-Atomic Emission Spectroscopic (ICP/AES) Analysis
C1433-08 Standard Specification for Precast Reinforced Concrete Monolithic Box Sections for Culverts, Storm Drains, and Sewers
C1433M-08a Standard Specification for Precast Reinforced Concrete Monolithic Box Sections for Culverts, Storm Drains, and Sewers (Metric)
C1435/C1435M-08 Standard Practice for Molding Roller-Compacted Concrete in Cylinder Molds Using a Vibrating Hammer
C1436-08 Standard Specification for Materials for Shotcrete
C1437-07 Standard Test Method for Flow of Hydraulic Cement Mortar
C1438-99(2005)e1 Standard Specification for Latex and Powder Polymer Modifiers for Hydraulic Cement Concrete and Mortar
C1439-08a Standard Test Methods for Evaluating Polymer Modifiers in Mortar and Concrete
C1440-08 Standard Specification for Thermoplastic Elastomeric (TPE) Gasket Materials for Drain, Waste, and Vent (DWV), Sewer, Sanitary and Storm Plumbing Systems
C1441-04 Standard Test Method for the Analysis of Refrigerant 114, Plus Other Carbon-Containing and Fluorine-Containing Compounds in Uranium Hexafluoride via Fourier-Transform Infrared (FTIR) Spectroscopy
C1442-06 Standard Practice for Conducting Tests on Sealants Using Artificial Weathering Apparatus
C1443-99(2005) Standard Specification for Glasses, Portlight, Circular, Fully Tempered
C1445-07 Standard Test Method for Measuring Consistency of Castable Refractory Using a Flow Table
C1446-07 Standard Test Method for Measuring Consistency of Self-Flowing Castable Refractories
C1447/C1447M-04e1 Standard Specification for Non-Asbestos Fiber-Cement Underdrain Pipe
C1448/C1448M-05 Standard Specification for Non-Asbestos Fiber-Cement Conduit
C1449/C1449M-05a Standard Specification for Non-Asbestos Fiber-Cement Nonpressure Sewer Pipe
C1450/C1450M-04 Standard Specification for Non-Asbestos Fiber-Cement Storm Drain Pipe
C1451-05 Standard Practice for Determining Uniformity of Ingredients of Concrete From a Single Source
C1452-00(2006) Standard Specification for Reinforced Autoclaved Aerated Concrete Elements
C1453-00(2006) Standard Test Method for the Determination of Uranium by Ignition and the Oxygen to Uranium (O/U) Atomic Ratio of Nuclear Grade Uranium Dioxide Powders and Pellets
C1454-07 Standard Guide for Pyrophoricity/Combustibility Testing in Support of Pyrophoricity Analyses of Metallic Uranium Spent Nuclear Fuel
C1455-07 Standard Test Method for Nondestructive Assay of Special Nuclear Material Holdup Using Gamma-Ray Spectroscopic Methods
C1456-08 Standard Test Method for the Determination of Uranium or Gadolinium, or Both, in Gadolinium Oxide-Uranium Oxide Pellets or by X-Ray Fluorescence (XRF)
C1457-00(2005) Standard Test Method for the Determination of Total Hydrogen Content of Uranium Oxide Powders and Pellets by Carrier Gas Extraction
C1458-00 Standard Test Method for Nondestructive Assay of Plutonium, Tritium and 241Am by Calorimetric Assay
C1459-04e1 Standard Specification for Performance of Non-Asbestos Fiber-Reinforced Cement Shake, Shingle, and Slate Roofing Systems
C1460-08 Standard Specification for Shielded Transition Couplings for Use With Dissimilar DWV Pipe and Fittings Above Ground
C1461-08 Standard Specification for Mechanical Couplings Using Thermoplastic Elastomeric (TPE) Gaskets for Joining Drain, Waste, and Vent (DWV), Sewer, Sanitary, and Storm Plumbing Systems for Above and Below Ground Use
C1462-00(2008) Standard Specification for Uranium Metal Enriched to More than 15 % and Less Than 20 % 235U
C1463-00(2007) Standard Practices for Dissolving Glass Containing Radioactive and Mixed Waste for Chemical and Radiochemical Analysis
C1464-06 Standard Specification for Bent Glass
C1465-08 Standard Test Method for Determination of Slow Crack Growth Parameters of Advanced Ceramics by Constant Stress-Rate Flexural Testing at Elevated Temperatures
C1466-00(2007) Standard Test Method for Graphite Furnace Atomic Absorption Spectrometric Determination of Lead and Cadmium Extracted from Ceramic Foodware
C1467/C1467M-00(2006) Standard Specification for the Installation of Molded Glass Fiber Reinforced Gypsum Parts
C1468-06 Standard Test Method for Transthickness Tensile Strength of Continuous Fiber-Reinforced Advanced Ceramics at Ambient Temperature
C1469-00(2005) Standard Test Method for Shear Strength of Joints of Advanced Ceramics at Ambient Temperature
C1470-06 Standard Guide for Testing the Thermal Properties of Advanced Ceramics
C1471-05 Standard Guide for the Use of High Solids Content Cold Liquid-Applied Elastomeric Waterproofing Membrane on Vertical Surfaces
C1472-06 Standard Guide for Calculating Movement and Other Effects When Establishing Sealant Joint Width
C1473-05 Standard Test Method for Radiochemical Determination of Uranium Isotopes in Urine by Alpha Spectrometry
C1474-00(2006)e1 Standard Test Method for Analysis of Isotopic Composition of Uranium in Nuclear-Grade Fuel Material by Quadrupole Inductively Coupled Plasma-Mass Spectrometry
C1475-05 Standard Guide for Determination of Neptunium-237 in Soil
C1476-06 Standard Test Method for Analysis of Urin for Technetium-99 by Inductively Coupled Plasma-Mass Spectrometry
C1477-08 Standard Test Method for Isotopic Abundance Analysis of Uranium Hexafluoride and Uranyl Nitrate Solutions by Multi-Collector, Inductively Coupled Plasma-Mass Spectrometry
C1478-08 Standard Specification for Storm Drain Resilient Connectors Between Reinforced Concrete Storm Sewer Structures, Pipes, and Laterals
C1478M-08a Standard Specification for Storm Drain Resilient Connectors Between Reinforced Concrete Storm Sewer Structures, Pipes, and Laterals (Metric)
C1479-07a Standard Practice for Installation of Precast Concrete Sewer, Storm Drain, and Culvert Pipe Using Standard Installations
C1479M-07a Standard Practice for Installation of Precast Concrete Sewer, Storm Drain, and Culvert Pipe Using Standard Installations [Metric]
C1480/C1480M-07 Standard Specification for Packaged, Pre-Blended, Dry, Combined Materials for Use in Wet or Dry Shotcrete Application
C1481-00(2006) Standard Guide for Use of Joint Sealants with Exterior Insulation and Finish Systems (EIFS)
C1482-08 Standard Specification for Polyimide Flexible Cellular Thermal and Sound Absorbing Insulation
C1483-04 Standard Specification for Exterior Solar Radiation Control Coatings on Buildings
C1484-07 Standard Specification for Vacuum Insulation Panels
C1485-06 Standard Test Method for Critical Radiant Flux of Exposed Attic Floor Insulation Using an Electric Radiant Heat Energy Source
C1486-00(2008 Standard Practice for Testing Chemical-Resistant Broadcast and Slurry-Broadcast Resin Monolithic Floor Surfacings
C1487-02(2007) Standard Guide for Remedying Structural Silicone Glazing
C1488-04 Standard Practice for Simulated Aging of Cellulosic Loose-Fill Insulation
C1489-01(2008)e1 Standard Specification for Lime Putty for Structural Purposes
C1490-04 Standard Guide for the Selection, Training and Qualification of Nondestructive Assay (NDA) Personnel
C1491-03 Standard Specification for Concrete Roof Pavers
C1492-03 Standard Specification for Concrete Roof Tile
C1493-01 Standard Test Method for Non-Destructive Assay of Nuclear Material in Waste by Passive and Active Neutron Counting Using a Differential Die-Away System
C1494-01(2007) Standard Test Methods for Determination of Mass Fraction of Carbon, Nitrogen, and Oxygen in Silicon Nitride Powder
C1495-07 Standard Test Method for Effect of Surface Grinding on Flexure Strength of Advanced Ceramics
C1496-01 Standard Guide for Assessment and Maintenance of Exterior Dimension Stone Masonry Walls and Facades
C1497-04 Standard Specification for Cellulosic Fiber Stabilized Thermal Insulation
C1498-04a Standard Test Method for Hygroscopic Sorption Isotherms of Building Materials
C1499-08 Standard Test Method for Monotonic Equibiaxial Flexural Strength of Advanced Ceramics at Ambient Temperature
C1500-08 Standard Test Method for Nondestructive Assay of Plutonium by Passive Neutron Multiplicity Counting
C1501-09 Standard Test Method for Color Stability of Building Construction Sealants as Determined by Laboratory Accelerated Weathering Procedures
C1502-01 Standard Test Method for Determination of Total Chlorine and Fluorine in Uranium Dioxide and Gadolinium Oxide
C1503-08 Standard Specification for Silvered Flat Glass Mirror
C1504-04e2 Standard Specification for Manufacture of Precast Reinforced Concrete Three-Sided Structures for Culverts and Storm Drains
C1504M-04e2 Standard Specification for Manufacture of Precast Reinforced Concrete Three-Sided Structures for Culverts and Storm Drains (Metric)
C1505-01(2007) Standard Test Method for Determination of Breaking Strength of Ceramic Tiles by Three-Point Loading
C1506-08 Standard Test Method for Water Retention of Hydraulic Cement-Based Mortars and Plasters
C1507-07 Standard Test Method for Radiochemical Determination of Strontium-90 in Soil
C1508-01(2006) Standard Test Method for Determination of Bromine and Chlorine in UF6 and Uranyl Nitrate by X-Ray Fluorescence (XRF) Spectroscopy
C1509-02(2007) Standard Specification for Beaded Process Glass Pipe and Fittings
C1510-01(2007) Standard Test Method for Color and Color Difference of Whitewares by Abriged Spectrophotometry
C1511-04 Standard Test Method for Determining the Water Retention (Repellency) Characteristics of Glass Fiber Insulation (Aircraft Type)
C1512-07 Standard Test Method for Characterizing the Effect of Exposure to Environmental Cycling on Thermal Performance of Insulation Products
C1513-04 Standard Specification for Steel Tapping Screws for Cold-Formed Steel Framing Connections
C1514-08 Standard Test Method for Measurement of 235U Fraction Using Enrichment Meter Principle
C1515-01 Standard Guide for Cleaning of Exterior Dimension Stone, Vertical And Horizontal Surfaces, New or Existing
C1516-05 Standard Practice for Application of Direct-Applied Exterior Finish Systems
C1517-02 Standard Test Method for Determination of Metallic Impurities in Uranium Metal or Compounds by DC-Arc Emission Spectroscopy
C1518-04 Standard Specification for Precured Elastomeric Silicone Joint Sealants
C1519-04 Standard Practice for Evaluating Durability of Building Construction Sealants by Laboratory Accelerated Weathering Procedures
C1520-02 Standard Guide for Paintability of Latex Sealants
C1521-08a Standard Practice for Evaluating Adhesion of Installed Weatherproofing Sealant Joints
C1522-05 Standard Test Method for Extensibility After Heat Aging of Cold Liquid-Applied Elastomeric Waterproofing Membranes
C1523-04 Standard Test Method for Determining Modulus, Tear and Adhesion Properties of Precured Elastomeric Joint Sealants
C1524-02a Standard Test Method for Water-Extractable Chloride in Aggregate (Soxhlet Method)
C1525-04 Standard Test Method for Determination of Thermal Shock Resistance for Advanced Ceramics by Water Quenching
C1526-08 Standard Specification for Serpentine Dimension Stone
C1527-03 Standard Specification for Travertine Dimension Stone
C1528-08 Standard Guide for Selection of Dimension Stone for Exterior Use
C1529-06a Standard Specification for Quicklime, Hydrated Lime, and Limestone for Environmental Uses
C1530-04 Standard Specification for Non-Asbestos Fiber-Cement Roofing Shakes, Shingles, and Slates with Designed Varying Profiles and Thicknesses
C1531-03 Standard Test Methods for In Situ Measurement Of Masonry Mortar Joint Shear Strength Index
C1532-06 Standard Practice for Selection, Removal, and Shipment of Manufactured Masonry Units and Masonry Specimens from Existing Construction
C1533-08 Standard Guide for General Design Considerations for Hot Cell Equipment
C1534-07 Standard Specification for Flexible Polymeric Foam Sheet Insulation Used as a Thermal and Sound Absorbing Liner for Duct Systems
C1535-05 Standard Practice for Application of Exterior Insulation and Finish Systems Class PI
C1536-03 Standard Test Method for Measuring the Yield for Aerosol Foam Sealants
C1539-08 Standard Test Method for Determination of Technetium-99 in Uranium Hexafluoride by Liquid Scintillation Counting
C1540-08 Standard Specification for Heavy Duty Shielded Couplings Joining Hubless Cast Iron Soil Pipe and Fittings
C1541-08 Standard Specification for Shielded Transition Couplings Using Flexible Poly Vinyl Chloride (PVC) Gaskets to Connect Dissimilar DWV Pipe and Fittings
C1542/C1542M-02 Standard Test Method for Measuring Length of Concrete Cores
C1543-02 Standard Test Method for Determining the Penetration of Chloride Ion into Concrete by Ponding
C1545-02(2007) Practice for Dispersing Pigments and Other Materials into Water-Based Suspensions with a High Intensity Mixer
C1546-02(2008)e1 Standard Guide for Installation of Gypsum Products in Concealed Radiant Ceiling Heating Systems
C1547-02(2007) Standard Classification for Fusion-Cast Refractory Blocks and Shapes
C1548-02(2007) Standard Test Method for Dynamic Young's Modulus, Shear Modulus, and Poisson's Ratio of Refractory Materials by Impulse Excitation of Vibration
C1549-04 Standard Test Method for Determination of Solar Reflectance Near Ambient Temperature Using a Portable Solar Reflectometer
C1550-08 Standard Test Method for Flexural Toughness of Fiber Reinforced Concrete (Using Centrally Loaded Round Panel)
C1552-08a Standard Practice for Capping Concrete Masonry Units, Related Units and Masonry Prisms for Compression Testing
C1553-08 Standard Guide for Drying Behavior of Spent Nuclear Fuel
C1554-03 Standard Guide for Materials Handling Equipment for Hot Cells
C1555-03a Standard Practice for Autoclaved Aerated Concrete Masonry
C1556-04 Standard Test Method for Determining the Apparent Chloride Diffusion Coefficient of Cementitious Mixtures by Bulk Diffusion
C1557-03(2008) Standard Test Method for Tensile Strength and Young's Modulus of Fibers
C1558-03(2007) Standard Guide for Development of Standard Data Records for Computerization of Thermal Transmission Test Data for Thermal Insulation
C1559-04 Standard Test Method for Determining Wicking of Glass Fiber Blanket Insulation (Aircraft Type)
C1560-03 Standard Test Method for Hot Water Accelerated Aging of Glass-Fiber Reinforced Cement-Based Composites
C1561-03 Standard Guide for Determination of Plutonium and Neptunium in Uranium Hexafluoride by Alpha Spectrometry
C1562-03e2 Standard Guide for Evaluation of Materials Used in Extended Service of Interim Spent Nuclear Fuel Dry Storage Systems
C1563-08 Standard Test Method for Gaskets for Use in Connection with Hub and Spigot Cast Iron Soil Pipe and Fittings for Sanitary Drain, Waste, Vent, and Storm Piping Applications
C1564-04 Standard Guide for Use of Silicone Sealants for Protective Glazing Systems
C1565-04 Standard Test Method for Determination of Pack-Set Index of Portland Cement
C1567-08 Standard Test Method for Determining the Potential Alkali-Silica Reactivity of Combinations of Cementitious Materials and Aggregate (Accelerated Mortar-Bar Method)
C1568-08 Standard Test Method for Wind Resistance of Concrete and Clay Roof Tiles (Mechanical Uplift Resistance Method)
C1569-03 Standard Test Method for Wind Resistance of Concrete and Clay Roof Tiles (Wind Tunnel Method)
C1570-03 Standard Test Method for Wind Resistance of Concrete and Clay Roof Tiles(Air Permeability Method)
C1571-03 Standard Guide for Characterization of Radioactive and/or Hazardous Wastes for Thermal Treatment
C1572-04 Standard Guide for Dry Lead Glass and Oil-Filled Lead Glass Radiation Shielding Window Components for Remotely Operated Facilities
C1574-04(2008) Standard Guide for Determining Blown Density of Pneumatically Applied Loose-Fill Mineral Fiber Thermal Insulation
C1576-05 Standard Test Method for Determination of Slow Crack Growth Parameters of Advanced Ceramics by Constant Stress Flexural Testing (Stress Rupture) at Ambient Temperature
C1577-08 Standard Specification for Precast Reinforced Concrete Monolithic Box Sections for Culverts, Storm Drains, and Sewers Designed According to AASHTO LRFD
C1579-06 Standard Test Method for Evaluating Plastic Shrinkage Cracking of Restrained Fiber Reinforced Concrete (Using a Steel Form Insert)
C1580-05 Standard Test Method for Water-Soluble Sulfate in Soil
C1581-04 Standard Test Method for Determining Age at Cracking and Induced Tensile Stress Characteristics of Mortar and Concrete under Restrained Shrinkage
C1582/C1582M-04 Standard Specification for Admixtures to Inhibit Chloride-Induced Corrosion of Reinforcing Steel in Concrete
C1583/C1583M-04e1 Standard Test Method for Tensile Strength of Concrete Surfaces and the Bond Strength or Tensile Strength of Concrete Repair and Overlay Materials by Direct Tension (Pull-off Method)
C1585-04e1 Standard Test Method for Measurement of Rate of Absorption of Water by Hydraulic-Cement Concretes
C1586-05 Standard Guide for Quality Assurance of Mortars
C1587-06 Standard Practice for Preparation of Field Removed Manufactured Masonry Units and Masonry Specimens for Compressive Strength Testing
C1589-05 Standard Practice for Outdoor Weathering of Construction Seals and Sealants
C1590-04 Standard Practice for Alternate Actinide Calibration for Inductively Coupled Plasma-Mass Spectrometry
C1591-04 Standard Test Method for Determination of the Modulus of Elasticity of AAC
C1592-04 Standard Guide for Nondestructive Assay Measurements
C1594-07 Standard Specification for Polyimide Rigid Cellular Thermal Insulation
C1597M-04 Standard Specification for Gypsum Wallboard (Hard Metric Sizes)
C1600/C1600M-08 Standard Specification for Rapid Hardening Hydraulic Cement
C1601-08 Standard Test Method for Field Determination of Water Penetration of Masonry Wall Surfaces
C1602/C1602M-06 Standard Specification for Mixing Water Used in the Production of Hydraulic Cement Concrete
C1603-05a Standard Test Method for Measurement of Solids in Water
C1604/C1604M-05 Standard Test Method for Obtaining and Testing Drilled Cores of Shotcrete
C1605-04 Standard Test Methods for Chemical Analysis of Ceramic Whiteware Materials Using Wavelength Dispersive X-Ray Fluorescence Spectrometry
C1606-04 Standard Test Method for Sampling Protocol for TCLP Testing of Container Glassware
C1607-06 Standard Test Method for Determination of "Microwave Safe for Reheating" for Ceramicware
C1608-07 Standard Test Method for Chemical Shrinkage of Hydraulic Cement Paste
C1609/C1609M-07 Standard Test Method for Flexural Performance of Fiber-Reinforced Concrete (Using Beam With Third-Point Loading)
C1610/C1610M-06a Standard Test Method for Static Segregation of Self-Consolidating Concrete Using Column Technique
C1611/C1611M-05 Standard Test Method for Slump Flow of Self-Consolidating Concrete
C1613-09 Standard Specification for Precast Concrete Grease Interceptor Tanks
C1614-05 Standard Practice for the Determination of 237Np, 232Th, 235U and 238U in Urine by Inductively Coupled Plasma-Mass Spectrometry (ICP-MS) and Gamma Ray Spectrometry.
C1615-05 Standard Guide for Mechanical Drive Systems for Remote Operation in Hot Cell Facilities
C1616-07e1 Standard Test Method for Determining the Moisture Content of Organic and Inorganic Insulation Materials by Weight
C1617-05 Standard Practice for Quantitative Accelerated Laboratory Evaluation of Extraction Solutions Containing Ions Leached from Thermal Insulation on Aqueous Corrosion of Metals
C1618-05 Standard Test Method for Concrete Sanitary Sewer Pipe by Negative (Vacuum) or Positive Air Pressure
C1618M-05 Standard Test Method for Concrete Sanitary Sewer Pipe by Negative (Vacuum) or Positive Air Pressure [Metric]
C1619-05 Standard Specification for Elastomeric Seals for Joining Concrete Structures
C1620-05 Standard Specification for Aerosol Polyurethane and Aerosol Latex Foam Sealants
C1621/C1621M-08 Standard Test Method for Passing Ability of Self-Consolidating Concrete by J-Ring
C1622/C1622M-06 Standard Specification for Cold-Weather Admixture Systems
C1623-06 Standard Specification for Manufactured Concrete Masonry Lintels
C1624-05 Standard Test Method for Adhesion Strength and Mechanical Failure Modes of Ceramic Coatings by Quantitative Single Point Scratch Testing
C1625-05 Standard Test Method for Uranium and Plutonium Concentrations and Isotopic Abundances by Thermal Ionization Mass Spectrometry
C1628-06 Standard Specification for Joints for Concrete Gravity Flow Sewer Pipe, Using Rubber Gaskets
C1629/C1629M-06 Standard Classification for Abuse-Resistant Nondecorated Interior Gypsum Panel Products and Fiber-Reinforced Cement Panels
C1630-06 Standard Guide for Development of Coverage Charts for Loose-Fill Thermal Building Insulations
C1631-08 Standard Specification for Cellular Polypropylene Thermal Insulation
C1634-06 Standard Specification for Concrete Facing Brick
C1635-06 Standard Test Method to Evaluate Adhesion/Cohesion Properties of a Sealant at Fixed Extension
C1636-06a Standard Guide for the Determination of Uranium-232 in Uranium Hexafluoride
C1637-06 Standard Test Method for the Determination of Impurities in Plutonium Metal: Acid Digestion and Inductively Coupled Plasma-Mass Spectroscopy (ICP-MS) Analysis
C1638-06 Standard Guide for the Determination of Iodine-129 In Uranium Oxide
C1639-07 Standard Specification for Fabrication of Cellular Glass Pipe and Tubing Insulation
C1642-07 Standard Practice for Determining Air Leakage Rates of Aerosol Foam Sealants and Other Construction Joint Fill and Insulation Materials
C1643-08 Standard Test Method to Measuring the Post Dispensing Volumetric Expansion of Aerosol Foam Sealants
C1644-06 Standard Specification for Resilient Connectors Between Reinforced Concrete On-Site Wastewater Tanks and Pipes
C1645-06 Standard Test Method for Freeze-thaw and De-icing Salt Durability of Solid Concrete Interlocking Paving Units
C1646/C1646M-08a Standard Practice for Making and Curing Test Specimens for Evaluating Resistance of Coarse Aggregate to Freezing and Thawing in Air-Entrained Concrete
C1647-06 Standard Practice for Removal of Uranium or Plutonium, or both, for Impurity Assay in Uranium or Plutonium Materials
C1648-06 Standard Guide for Choosing a Method for Determining the Index of Refraction and Dispersion of Glass
C1649-08 Standard Practice for Instrumental Transmittance Measurement of Color for Flat Glass, Coated and Uncoated
C1650-07 Standard Practice for Instrumental Reflectance Measurement of Color for Flat Glass, Coated, and Uncoated
C1652/C1652M-06 Standard Test Method for Measuring Optical Distortion in Flat Glass Products Using Digital Photography of Grids
C1655-06 Standard Classification of Fireclay and High-Alumina Mortars
C1656-07 Standard Guide for Measuring the Reactivity of Hydraulic Refractory Castables using Exothermic Profile
C1658/C1658M-06 Standard Specification for Glass Mat Gypsum Panels
C1661-07 Standard Guide for Viewing Systems for Remotely Operated Facilities
C1662-07 Standard Practice for Measurement of the Glass Dissolution Rate Using the Single-Pass Flow-Through Test Method
C1666/C1666M-08 Standard Specification for Alkali Resistant (AR) Glass Fiber for GFRC and Fiber-Reinforced Concrete and Cement
C1667-07 Standard Test Method for Using Heat Flow Meter Apparatus to Measure the Center-of-Panel Thermal Resistivity of Vacuum Panels
C1671-07 Standard Practice for Qualification and Acceptance of Boron Based Metallic Neutron Absorbers for Nuclear Criticality Control for Dry Cask Storage Systems and Transportation Packaging
C1672-07 Standard Test Method for Determination of Uranium or Plutonium Isotopic Composition or Concentration by the Total Evaporation Method Using a Thermal Ionization Mass Spectrometer
C1673-07e1 Standard Terminology of C26.10 Nondestructive Assay Methods
C1674-08 Standard Test Method for Flexural Strength of Advanced Ceramics with Engineered Porosity (Honeycomb Cellular Channels) at Ambient Temperatures
C1676-08 Standard Specification for Microporous Thermal Insulation
C1678-07 Standard Practice for Fractographic Analysis of Fracture Mirror Sizes in Ceramics and Glasses
C1679-08 Standard Practice for Measuring Hydration Kinetics of Hydraulic Cementitious Mixtures Using Isothermal Calorimetry
C1681-09 Standard Test Method for Evaluating the Tear Resistance of a Sealant Under Constant Strain
C1683-08 Standard Practice for Size Scaling of Tensile Strengths Using Weibull Statistics for Advanced Ceramics
C1684-08 Standard Test Method for Flexural Strength of Advanced Ceramics at Ambient Temperature-Cylindrical Rod Strength
C1685-08 Standard Specification for Pneumatically Applied High-Temperature Fiber Thermal Insulation for Industrial Applications
C1688/C1688M-08 Standard Test Method for Density and Void Content of Freshly Mixed Pervious Concrete
C1689-08a Standard Practice for Subsampling of Uranium Hexafluoride
C1699-08 Standard Test Method for Moisture Retention Curves of Porous Building Materials Using Pressure Plates
C1703-08 Standard Practice for Sampling of Gaseous Uranium Hexafluoride

http://www.int-bizdirectory.com/Standards.htm

http://www.int-bizdirectory.com/Standards/ASTM/ASTM%20C.htm